HP NonStop RDF, Руководство по управлению

Страница: 374 / 478

Cause The updater has found a Stop-RDF-Updater record in the image trail. This special
record is generated in the TMF audit trail on the primary system when an SQL DDL operation
WITH SHARED ACCESS involving the specified file has completed. Each updater will stop
when it reaches this record in the image trail.
Effect The updaters stop.
Recovery When all updaters have stopped, you must perform the same SQL DDL operation
on the RDF backup system that was originally performed on the primary system. When this
operation has been completed, start the updaters again with the START UPDATE command.
NOTE:
You must not start the updaters until you have performed the DDL operation.
Otherwise, you will corrupt your database on the RDF backup system.
734
Inappropriate message type type received {from process-id cpu,pin |
from process processname} [, program file programfile]
type
is the message number in the received message, which was not one of the codes recognized
by the RDF process.
cpu,pin
is the cpu,pin number of the process that sent the message.
processname
is the name of the process that sent the message.
programfile
is the name of the object file from where the process that sent the message was started.
Cause An RDF process received a message that does not apply to it.
This message is a warning that indicates a possible problem in the configuration file, a
programming problem within RDF, or that a process outside of RDF tried to communicate
with an RDF process. Whenever possible, this message includes the offending process name
or process id as well as the program file name.
Effect The message type is reported with no other effect.
Recovery This is an informational message; no recovery is required.
To see if the message resulted from an incorrect configuration file, examine the configuration
file and verify that all necessary parameters have been specified correctly.
Report this to your service provider.
735
MAT position of last audit record SNO sno RBA rba
sno
is the sequence number in the Master Audit Trail (MAT) of the last audit record received
by the RDF receiver process.
rba
is the relative byte address of the record.
Cause The purger logs this message after the successful completion of an RDF takeover
operation.
• If all data volumes on the primary system are configured to the MAT, then the reported
position is the end of the last record received from the extractor.
• If any data volumes on the primary system are configured to auxiliary audit trails, then
the reported position is the end of the last commit or abort record received from the
extractor for which no data from any auxiliary audit trail is missing.
Effect
The MAT position is used for two purposes:
374 Messages