HP E8402A, Руководство пользователя и обслуживания, Страница: 172 / 249

174 Programming the Enhanced Monitor Chapter 3
*ESE
<mask>
*ESE?
*ESE <mask> command sets the value of the enable register in the Standard Event
status group.
*ESE? query returns the value of the enable register in the Standard Event status
group.
The standard event status group provides the status of common instrument events
including synchronization (Operation Complete) and Errors (Parser, Execution,
Command Errors, and Instrument Dependent).
The enable register specifies which bits in the event register can generate a summary
bit. The instrument logically ANDs corresponding bits in the event and enable
registers, and ORs all the resulting bits to obtain a summary bit. Summary bits are,
in turn, recorded in another register. The standard event status summary bit is
recorded in the Status Byte. Enable registers are read-write. Enable registers are not
affected by *CLS (Clear status). Querying enable registers does not affect them.
The following table describes each bit in the Standard Event status group:
Parameter
Returned Data
Reset Condition
*RST resets register the last value saved by the SYST:NVS command.
Related
Commands
STATus:OPERation:ENABle, STATus:QUEStionable:ENABle, *ESE?
Bit Description Decimal Value
0 Operation Complete (OPC) 1
1 Request Control (RQC) 2
2 Query Error (QYE) 4
3 Instrument Dependent (DDE) 8
4 Execution Error (EXE) 16
5 Command Error (CME) 32
6 User Request (URQ) 64
7 Power On (PON) 128
Name Type Range Default Description
<
mask>
int16 0 - 255 none Bit mask indicating which enable bits are set (1)
or cleared (0) for the Standard Event status
group.
Type Range Default Description
int16 0 - 255 none Bit mask indicating which enable bits are set (1) or cleared (0)
for the Standard Event status group.