horiba F-74BW, Инструкция по эксплуатации

Страница: 32 / 132

Chapter 3 Basic Operation
3.2 Settings
20 HORIBA
3.2.3 Auto Data Memory Setting
Data memory can be performed automatically at a
regular interval.
This setting applies for both of CH1 and CH2.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the auto data
memory setting screen.
2.
Press the ENTER key to enter the auto data
memory change screen.
3.
Press the or key to change ON or OFF, and
press the ENTER key.
4.
If you select ON, press the or key to select a
digit and press the
▲
or
▼
key to change the value,
and then press the ENTER key.
Setting range: 2 seconds to 24 hours
▲ ▼
▲
▼