manualshive.com logo in svg

horiba F-74BW, Инструкция по эксплуатации

Поделиться
Скачать
horiba F-74BW Скачать руководство пользователя страница 2

■

Preface

This manual describes the operation of the F-74BW pH/ION/COND Meter.
Be sure to read this manual before using the product to ensure proper and safe
operation of the instrument. Also safely store the manual so it is readily available
whenever necessary. 

Product specifications and appearance, as well as the contents of this manual
are subject to change without notice.

■

Warranty and Responsibility

HORIBA, Ltd. warrants that the Product shall be free from defects in material
and workmanship and agrees to repair or replace free of charge, at option of
HORIBA, Ltd., any malfunctioned or damaged Product attributable to
responsibility of HORIBA, Ltd. for a period of one (1) year from the delivery
unless otherwise agreed with a written agreement. In any one of the following
cases, none of the warranties set forth herein shall be extended;

・

Any malfunction or damage attributable to improper operation

・

Any malfunction attributable to repair or modification by any person not
authorized by HORIBA, Ltd.

・

Any malfunction or damage attributable to the use in an environment not
specified in this manual

・

Any malfunction or damage attributable to violation of the instructions in this
manual or operations in the manner not specified in this manual

・

Any malfunction or damage attributable to any cause or causes beyond the
reasonable control of HORIBA, Ltd. such as natural disasters

・

Any deterioration in appearance attributable to corrosion, rust, and so on

Replacement of consumables 

HORIBA, LTD. SHALL NOT BE LIABLE FOR ANY DAMAGES RESULTING
FROM ANY MALFUNCTIONS OF THE PRODUCT, ANY ERASURE OF DATA,
OR ANY OTHER USES OF THE PRODUCT.

■

Trademarks

Generally, company names and brand names are either registered trademarks
or trademarks of the respective companies.

■

Unauthorized Reprinting or Copying of This 
Operation Manual

No unauthorized reprinting or copying of all or part of this operation manual is
allowed. The utmost care has been used in the preparation of this operation
manual.

 

Copyright © 2011 by HORIBA, Ltd. All rights reserved.

Содержание F-74BW





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды