Honeywell NetAXS-123 Скачать руководство пользователя страница 88

Страница: 88 / 171

www.honeywell.com

Using WIN-PAK with NetAXS-123

Supported Configurations

Table 3-5

lists the WIN-PAK configurations supported by the NetAXS-123.

Table 3-5:

NetAXS-123/NS4 Interoperability using WIN-PAK

Additional notes with respect to WIN-PAK compatibility:

•

WIN-PAK will not be aware of NetAXS-123 specific controller type at
NetAXS-123 release.

•

WIN-PAK configuration of NetAXS-123 3-door system will be supported as
an N-1000-4/PW-2000-4X, but reader 4 will be inoperative.

•

WIN-PAK configuration of NetAXS-123 2-door will be supported as an
N-1000-4/PW-2000-4X, but readers 3 and 4 will be inoperative.

•

WIN-PAK configuration of NetAXS-123 1-door controller will be supported
as an N-1000-4/PW-2000-4X, but readers 2, 3, 4 will be inoperative.

•

WIN-PAK factory defaults will not work with the NetAXS-123. I/O and
interlock assignments must be made for WIN-PAK to work with an
NetAXS-123, as described in earlier sections.

Gateway

Downstream

WIN-PAK
Support

Notes

NetAXS-123

NS4-R3 (4-Door)

NetAXS-123

NS4-R3 (2-Door)

NS4-R3 (2 Door) Panel may not be
configured as downstream panel in
any circumstance.

NetAXS-123

NS4-R3 (2- or 4-

Door)

NetAXS-123

The NS4-R3 may be used as a PCI
by WIN-PAK, but the Web Server
will not support configuration of

NetAXS-123™

Panels. The

NetAXS-123™

will reject any

Binary Commands requested from
an NS4-R3.

NetAXS-123

Mixed loop of

NetAXS-123

NS4-R3

PCI2/PCI3

Mixed loop of

NetAXS-123

NS4-R3 &

N-1000 & NS2

Содержание NetAXS-123












































































































































































Результаты поиска

Содержание NetAXS-123

Отзывы:

Honeywell NetAXS-123, Руководство пользователя, Страница: 88 / 171

Результаты поиска

Содержание NetAXS-123

Отзывы: