Honeywell NetAXS-123, Руководство пользователя, Страница: 49 / 171

Configuring via the Web Server
Configuring the Doors
NetAXS-123 Access Control Unit User’s Guide , Document 800-05168, Revision B 39
Anti-Passback Configures the anti-passback feature. Once configured
under Configuration > System > General screen (see
General Tab , page 21 ), the user enables the anti-passback
feature on the reader, which requires a valid card for entry
and exit. The card holder must use the card in the proper
IN/OUT sequence--that is, a card swiped at an IN reader
must then be swiped at an OUT reader, or vice versa--a card
swiped at an OUT reader must then be swiped at an IN
reader. If the user's IN/OUT sequence is invalid, then an
anti-passback violation event is generated for the type of
anti-passback chosen (Hard or Soft) and the card holder is
either denied access (Hard) or allowed access (Soft).
Enabled - Enables the anti-passback feature.
Hard - Validates IN/OUT status before allowing entry. A
second swipe of the card at the same type of reader
(IN/OUT) causes a Hard anti-passback violation and the
user is denied entry.
Soft - Validates IN/OUT status before allowing entry. A
second swipe of a card at the same type of reader (IN/OUT)
causes a Soft anti-passback violation but the user is allowed
entry.
Out - Applies to readers located inside the
anti-passback-controlled area. Card holders use these
readers when attempting to exit the
anti-passback-controlled area.
In - Applies to readers located outside the
anti-passback-controlled area. Card holders use these
readers when attempting to enter the
anti-passback-controlled area.
Table 2-5: Configuration > Doors > 1 > Reader A Tab Fields (continued)
Setting Description