manualshive.com logo in svg

Honeywell NetAXS-123, Руководство пользователя, Страница: 106 / 171

Поделиться
Скачать
Honeywell NetAXS-123 Скачать руководство пользователя страница 106

96

www.honeywell.com

Using WIN-PAK with NetAXS-123

Standalone Commands

3.8  Standalone Commands

Note:  

Standalone commands are not supported in web mode. They are only available 

for use when you configure your NetAXS-123 system using WIN-PAK’s command 
files. These standalone commands can also be applied from a “terminal mode” method 
of programming.

Caution: 

Use the following commands, in the order they are listed, to configure the 

NetAXS-123 panel:

1. T command: Sets the panel’s time.

2. D command: Sets the panel’s date.

3. L command: Creates time zones for use by the cards.

4. C command: Adds cards to or deletes cards from the panel.

5. W command: Programs each input for either NO/NC and Supervised or 

Non-Supervised operation.

6. P command: Sets interlocks between input points and/or output points.

7. H command: Sets holiday dates.

Note:  

In all examples, the underscore “_” indicates a “space” character and <CR> 

indicates a carriage return.

3.8.1  T (Time) Command

_T=pn_hh:mm<CR>

Variables:

pn = panel number (1-31)
hh = hours (0-23) (Military time)
mm = minutes (00-59)

Example #1:

_T=1_08:30<CR>

This command would set panel 1 to a time of 8:30 AM.

Example #2:

_T=6_18:15<CR>

This command would set panel 6 to a time of 6:15 PM.

Содержание NetAXS-123












































































































































































Отзывы:

Нет отзывов