Honeywell NetAXS-123 Скачать руководство пользователя страница 136

Страница: 136 / 171

126

www.honeywell.com

File Management

Generating Reports

3. Use the descriptions in

Table 5-1

to read the event records.

Table 5-1:

Status > Report Fields

Setting

Description

Date/Time [ID]

Provides the date and exact time the event was generated,
according to the panel’s time.

Card Holder Name

Identifies the card holder.

Card Num

Specifies the unique number by which the card holder may
be identified.

Device Name [ID]

Identifies the device that generated the event.

Logical Device Number

- A unique number starting at 1

that is assigned to an alarm generating point. This number
is never duplicated either on a Controller or its attached 1-
or 2-Door

I/O board

. There is one exception to this: Door

Readers. For a list of common values, see

Table 4-2

Physical Device Number

- A number at the board level

that is assigned to a specific alarm generating point.
NetAXS-123 Controller starts at 1 and goes to 8, 1-Door

I/O board

as a new board goes from 1 to 4, and 2-door

I/O

board

goes from 1 to 8. System alarms such as reset which

are not board-specific will report a value of 0. There is one
exception to this: Door Readers. For a list of common
values, see

Table 4-2

Code

Identifies the current transaction generated by the card. For
example, the possible transactions could include:

• Card Found

• Card Not Found

• Time Zone Violation

PIN/Site

Identifies either the PIN or the site code number of the card.
Only used to report an event that has an invalid Site Code
or invalid PIN.

Содержание NetAXS-123












































































































































































Результаты поиска

Содержание NetAXS-123

Отзывы:

Honeywell NetAXS-123, Руководство пользователя, Страница: 136 / 171

Результаты поиска

Содержание NetAXS-123

Отзывы: