manualshive.com logo in svg

Honeywell NetAXS-123, Руководство пользователя, Страница: 42 / 171

Поделиться
Скачать
Honeywell NetAXS-123 Скачать руководство пользователя страница 42

32

www.honeywell.com

Configuring via the Web Server

Configuring Time Management

To modify a time zone

: 

1. In the Tz column, click the number of the time zone you want to modify.

2. Change the time zone settings as you desire.

3. Click 

Modify

 to accept the changes.

To delete a time zone

:

Caution: 

Do not delete a time zone that is currently in use. 

1. In the Tz column, click the number of the time zone you want to delete.

2. Click 

Delete

.

3. Click 

OK

 at the delete prompt.

Linking Time Zones

You assign each Time Zone a specific start time and end time. The maximum time 
range is from 12:00 AM to 11:59 PM. Note that the time range cannot cross midnight. 
You can set this time range to be effective for any day of the week, including 
weekends (Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday). 
These days can also include holidays, which are considered special days that take 
precedence over a standard day. Also, since Access Levels, Outputs, and Inputs can 
only be given one Time Zone selection at a time, you can link Time Zones together to 
create bigger time zones that could not fit into a single Time Zone.

For example, suppose you must create a Cleaning Crew Time Zone. The time zone(s) 
are to be set up as follows: Monday-Friday 5 PM -1 AM, Saturday and Sunday 8 
AM-1 PM, no holidays. This becomes three separate time zones, as follows.

Note:  

Time Zone 1 is reserved as a default with a time range of 24 hours, seven days a 

week.

Time Zone Number

Time Range

2

Monday-Friday, 5 PM -11:59 PM
(Remember, the time range cannot cross 
midnight, so 11:59 PM is the limit.)

3

Tuesday-Saturday, 12:00 AM-1:00 AM.

4

Saturday-Sunday, 8:00 AM-1:00 PM.

Содержание NetAXS-123












































































































































































Отзывы:

Нет отзывов