manualshive.com logo in svg

Honeywell NetAXS-123, Руководство пользователя, Страница: 122 / 171

Поделиться
Скачать
Honeywell NetAXS-123 Скачать руководство пользователя страница 122

112

www.honeywell.com

Monitoring NetAXS-123 Status

Monitoring Inputs

4.4  Monitoring Inputs

The panel supports door, panel, and auxiliary inputs. The door inputs provide egress, 
status, and tamper monitoring. The panel inputs provide power fail and tamper status. 
The auxiliary inputs support any monitoring devices connected.

The Input Status screen enables you to: 

•

View the current status of each input (Normal, Alarm, Cut, Short, Shunted).

•

Shunt or un-shunt any input. When an input is shunted, its change of state is 
ignored. This way you can allow a door to be held open without falsely 
signalling an alarm. The default state of an input point is “un-shunted.”

•

Restore the input to its time zone. A time zone is a specified time period during 
which the input will be shunted and the alarm de-activated (see 

Configuring 

Time Management

, 

page 29

). 

Click 

Monitoring > Inputs

 to display the Input Status screen:

Figure 4-5:   

Monitoring > Inputs

To shunt or un-shunt an input

:

1. Click the input name to display a prompt. 

Содержание NetAXS-123












































































































































































Отзывы:

Нет отзывов