Honeywell NetAXS-123, Руководство пользователя, Страница: 52 / 171

42 www.honeywell.com
Configuring via the Web Server
Configuring the Doors
3. Use the descriptions in Table 2-6 to select card formats.
Note:
The user should never add in more than one format using the same
number of bits. If you need more information, please contact Technical
Support.
4. Click to highlight each desired card format listed in the Available box, and
click the green right arrow button to move the format(s) into the Selected
box.
Note:
If you select no formats, the reader will use all available formats (up to
128) as described for the Available setting in Table 2-6 . If you select a subset
of formats for a given reader, the reader will interpret only those formats and
ignore formats that are not selected, as described for the Selected setting in
Table 2-6 .
5. Click
Submit Changes.
Table 2-6: Configuration > Doors: > 1 > Reader A Tab >
Card Format Fields
Setting Description
Available (column) Lists all the formats in the panel. All formats, new ones as
well as the eight default formats, are listed under
Available. This information allows all readers by default
to use all formats to try and decipher card reads. The
reader will then use every Available format(s) to decipher
incoming card reads. Any cards swiped with formats that
do not match the Available format(s) are then reported as
an Invalid Format event.
Selected (column) Lists specific formats selected by the user from the
Available list that the reader should use to decipher card
reads. As soon as a single format is placed in the Selected
column, the reader begins to use only the selected format,
ignoring any unselected formats in the Available list.
Cards swiped with formats that do not match the Selected
format(s) are then reported as an Invalid Format event,
even if the format is in the Available list. This selection is
on a per reader basis--that is, each reader can have its own
selected formats. Selections at one reader do not affect
another reader.