Honeywell NetAXS-123 Скачать руководство пользователя страница 19

Страница: 19 / 171

Getting Started

Connecting to the Web Server

NetAXS-123 Access Control Unit User’s Guide

Document 800-05168, Revision B

4. Press the

Enter

key to display the Honeywell NetAXS-123 login screen.

Note:

If you are using Microsoft Internet Explorer 7 and you receive a

certificate error message, follow these steps to clear it:

a. Enter the IP address of the panel into the URL box.

b. Click

Continue to the website (not recommended)

to display the login

screen.

c. Click

Certificate Error

at the top-right of the IP address. The “Untrusted

Certificate” screen appears.

d. Click the

View Certificates

bar. The “Certificate Information” screen

appears.

e. Click

Install Certificate

. The “Certificate Import Wizard” screen appears.

f. Click

Next

and follow the prompts; leave all settings at their default

values. A Security Warning asks if you want to install the certificate.

g. Click

Yes

. A Certificate Import Wizard message states “The import was

successful.”

h. Click

. The Certification Information message appears again.

i. Click

j. Close the web browser and re-open it.

k. Enter the IP address again into the URL box. The login screen appears

without the certificate error.

5. Enter “admin” in the User Name field, and enter “admin” in the Password

field. Both the user name and password are case-sensitive.

Note

: It is recommended that you change your default user name (admin) and

password (admin) to a new user name and password at this time. To do this,
proceed to the instructions in

Configuring Users, page 70

Содержание NetAXS-123












































































































































































Результаты поиска

Содержание NetAXS-123

Отзывы:

Honeywell NetAXS-123, Руководство пользователя, Страница: 19 / 171

Результаты поиска

Содержание NetAXS-123

Отзывы: