Honeywell NetAXS-123 Скачать руководство пользователя страница 39

Страница: 39 / 171

Configuring via the Web Server

Configuring Time Management

NetAXS-123 Access Control Unit User’s Guide

Document 800-05168, Revision B

2.3 Configuring Time Management

This set of time-related functions includes:

•

Setting the current time by which the panel will function.

•

Creating the time zones by which the panel will control the operation of the
inputs, outputs, groups, readers, access levels, and cards through access levels.

•

Defining the holiday schedule.

2.3.1 Current Time Tab

The Current Time tab displays time management configuration settings.

The Current Time tab enables you to:

•

Set the current loop time.

•

Specify the time format (12 hour/24 hour).

•

Set a new date.

•

Set a new time.

•

Set the geographic time zone.

•

Specify the IP address of the time server being used.

•

Force a time synchronization between the panel and the time server.

Click

Time > Current Time > Current Time

tab to display the Current Time tab:

Figure 2-6:

Time > Current Time > Current Time Tab

Содержание NetAXS-123












































































































































































Результаты поиска

Содержание NetAXS-123

Отзывы:

Honeywell NetAXS-123, Руководство пользователя, Страница: 39 / 171

Результаты поиска

Содержание NetAXS-123

Отзывы: