Honeywell INTEVIO, Руководство пользователя

Страница: 73 / 133

65
2
．
Time
Time is used to set the parameters related to time, which is displayed as below:

Time Synchronization
Time Synchronization is used to set the parameters of time synchronization for the MCU through
NTP protocol, which is normally disabled by default.
If NTP Server is enabled, the MCU will work as an NTP server and other devices will synchronize
the time with it.
If NTP Client is enabled, the MCU will automatically synchronize the time with an NTP server;
the
“Server IP” and “Sync. Period” should be set.

Time Zone Setting
Time Zone Setting is used to set the time zone of the Master Control Unit. Choose the local time
zone and click the
“Update” button to change the time zone of the MCU. If the time zone is
different to the local time zone, the time and date will be wrong during time synchronization.

Date & Time Setting
Date & Time
is used to view and manually update the device’s date and time. Click the “Get”
button to read the device’s time and clicking the “Update” button can synchronize the device’s
date and time with the computer.
3
．
Amplifier
Set the model of the power amplifier corresponding to each audio channel, then set the ports of
the MCU which are connected to the output of the power amplifier. The setting must be the
same as the actual connection.
When users need the amplifier backup function, if the audio signal of a spare power amplifier is
from the MCU, please set the model of the power amplifier in the Spare row, then set the spare
ports of the devices which are connected to the output of the spare power amplifier.
In the Backup Amplifier column, select the spare amplifier corresponding to the main amplifiers
to enable the backup function.