CM4 Four-Point Continuous Monitor
CM4 Technical Manual
3-7
3.5.3 Rack Mounting the CM4-P
CAUTION
The pyrolyzer operates at a very high temperature, therefore CM4-P
units should not be placed immediately adjacent to each other. To
provide effective air circulation around the Model CM4-P cabinets,
the configuration guidelines in Table 3-1 must be maintained.
The recommended quantities and combinations of CM4 and CM4-P
units in a rack is shown in Table 3-1.
Configuration Qty CM4
Qty
CM4-P
Qty Printer
and Share Box
1
5
2
0
2
3
3
0
3
1
4
0
4
3
2
1
5
1
3
1
6
0
4
1
7
7
0
0
Table 3-1: CM4 Rack Mount Loading Capacity
The Model CM4-P is not retrofittable to “System16-style” enclosures
(P/N 874293). Only “Schroff-Style” enclosures (P/N 1874-0050 and
1874-051) may be used with these units.
3.5.4 Rack Enclosures
The rack enclosure configurations provide space for up to seven CM4
units (or five CM4 units plus a printer) in an Honeywell Analytics-
supplied cabinet.
The CM4 rack enclosure will be custom configured for each application.
Supplemental installation and start-up instructions will be provided with
the cabinet. As a pre-installation step, users must prepare floor anchors
to secure the base of the cabinet and prevent tipping. See
. For detailed installation prints , see
.
NOTE
There are several kits available to mount CM4 and CM4-P units
into existing rack enclosures. Contact Honeywell Analytics for
more information.
珠海司福斯特科技有限公司
www.safedtech.com
