manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

INDIVIDUAL ROOM CONTROL APPLICATIONS

ENGINEERING MANUAL OF AUTOMATIC CONTROL

419

TWO-PIPE HEATING/COOLING 

The flow of medium thr ough a f an coil unit can be contr olled

in tw o ways. One method uses a tw o-way valve to contr ol the
flow of steam or hot or c hilled water. The second method , shown
in F igur e 31, uses a thr ee-way valve to contr ol hot or c hilled
water f low.

Fig. 32. Two-Pipe Heating/Cooling Fan Coil Unit.

The r oom ther mosta t opens the coil v alve on a f all in space

temper atur e dur ing the hea ting c ycle. In the cooling c ycle,
chilled w ater in the pipes causes the pipe-mounted sensor to
reverse the ther mosta t action and the ther mosta t opens the v alve
as space temper atur e rises. The fan can be oper ated fr om a local
switch or a central time clock.

The surf ace ar ea of the coil is lar ge to accommoda te cooling

requir ements.  Ther efor e, when a single coil is used f or both
heating and cooling , the hot w ater suppl y temper atur e should
be lower. Typical hot w ater suppl y temper atur es range between
32 and 60

°

C.

Fig. 31. Two-Pipe Heating Fan Coil Unit

Using Three-Way Mixing Valve.

The thr ee-way valve pr ovides constant f low in the suppl y

and r etur n lines and minimiz es pr essur e fluctua tions a t the v alve.
A modula ting ther mosta t contr ols the thr ee-way valve to
regula te water f low thr ough the coil. In a hea ting a pplica tion,
when the ther mosta t senses space temper atur e below the
ther mosta t setpoint,  the valve is positioned to allo w full flow
thr ough the coil.  As space temper atur e r ises, the ther mosta t
contr ol signal modula tes the v alve to decr ease the amount of
flow thr ough the coil and incr ease the b ypass f low ar ound the
coil. At the upper end of the ther mosta t thr ottling r ang e, the
valve is in the coil b ypass position,  elimina ting f low thr ough
the coil.  The fan r uns contin uousl y or is stopped as space
temper atur e rises above setpoint. Cooling-onl y systems oper ate
in a similar w ay.

TWO-PIPE HEATING/COOLING, SINGLE COIL

Figur e 32 shows a tw o-pipe f an coil a pplica tion tha t uses a

single coil for hea ting and cooling with seasonal c hang eover.
Control for this application requires a heating/cooling room
ther mosta t tha t r everses its action fr om a r emote hea ting/cooling
chang eover signal. One method of automa tic chang eover is to
install a pipe-mounted sensor that switches thermostat action
when it senses a change in supply medium between hot and
chilled water. Because it cannot of fer sim ultaneous hea ting and
cooling ca pa bility, this system can cause pr oblems dur ing
inter media te seasons w hen hot w ater is in the system and
cooling is needed , or vice v er sa.

C3033

DISCHARGE 
AIR

THERMOSTAT

RETURN
AIR

FILTER

HEATING 
COIL

FAN

FAN
SWITCH

POWER

3-WAY
MIXING
VALVE

HOT
WATER
SUPPLY

HOT
WATER
RETURN

C3032

DISCHARGE 
AIR

THERMOSTAT

RETURN
AIR

FILTER

HEATING OR
COOLING COIL

FAN

POWER

TIME
CLOCK

3-WAY
MIXING
VALVE

SUPPLY

PIPE-MOUNTED
SENSOR

RETURN

HOT
WATER
OR
CHILLED
WATER

Fig. 33. Digitally Controlled Two-Pipe

Heating/Cooling Fan Coil Unit.

M15317

FILTER

FAN

RA

OUTDOOR AIR

ON

CONTROL
PROGRAM

-1.5

24

24

8

13

77

HEATING
DEADBAND

WALL MODULE

TEMPERATURE

COOLING
SETPOINT

PERCENT
OPEN

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

U-Line H-3934 Manual preview
H-3934
Бренд: U-Line Страницы: 7
Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Бренд: Baccara Страницы: 16
IAI ROBO Cylinder RCP2 Series Quick Start Manual preview
ROBO Cylinder RCP2 Series
Бренд: IAI Страницы: 5
UNICORECOMM UM4B0 User Manual preview
UM4B0
Бренд: UNICORECOMM Страницы: 32
UNICORECOMM UM220-IV M0 Additional Instructions For Installation And Operation preview
UM220-IV M0
Бренд: UNICORECOMM Страницы: 7
UNICORECOMM UM220-INS NF Installation And Operation User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 26
UNICORECOMM UM220-INS NF User Manual preview
UM220-INS NF
Бренд: UNICORECOMM Страницы: 25
National Instruments SCC-DO01 User Manual preview
SCC-DO01
Бренд: National Instruments Страницы: 14
IBM MTM 2145-SV1 Hardware Installation Manual preview
MTM 2145-SV1
Бренд: IBM Страницы: 214
STIEBEL ELTRON GWS 1 Installation Manual preview
GWS 1
Бренд: STIEBEL ELTRON Страницы: 44
Sabiana QCV-MB Manual preview
QCV-MB
Бренд: Sabiana Страницы: 60
Burkert 8745 MFC Ethernet Operating Instructions Manual preview
8745 MFC Ethernet
Бренд: Burkert Страницы: 70
Tempco TEC-9100 Instructions Manual preview
TEC-9100
Бренд: Tempco Страницы: 12
M-system R7M-SV4-R Instruction Manual preview
R7M-SV4-R
Бренд: M-system Страницы: 7
D+H DDS 54/500 Original Instructions Manual preview
DDS 54/500
Бренд: D+H Страницы: 12
DUCH CAM888 User Manual preview
CAM888
Бренд: DUCH Страницы: 9
EFI Fiery Configuration And Setup preview
Fiery
Бренд: EFI Страницы: 55
Belkin LiveAction User Manual preview
LiveAction
Бренд: Belkin Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды