manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

MICROPROCESSOR-BASED/DDC FUNDAMENTALS

133

ENGINEERING MANUAL OF AUTOMATIC CONTROL

INTRODUCTION

This section discusses the types of microprocessor-based

controllers used in commercial buildings. These controllers
measure signals from sensors, perform control routines in
software programs, and take corrective action in the form of
output signals to actuators. Since the programs are in digital
form, the controllers perform what is known as

 

direct digital

control (DDC). Microprocessor-based controllers can be used
as stand-alone controllers or they can be used as controllers
incorporated into a building management system utilizing a
personal computer (PC) as a host to provide additional

DEFINITIONS

Analog-to-digital (A/D) converter: The part of a micropro-

cessor-based controller that changes an analog input
signal to a digital value for use by the microprocessor
in executing software programs. Analog input values
typically come from temperature, pressure, humidity,
or other types of sensors or transducers.

Application software: Programs that provide functions such

as direct digital control, energy management, lighting
control, event initiated operations, and other alarm
and monitoring routines.

Configurable controller: A controller with a set of selectable

programs with adjustable parameters but without the
ability to modify the programs.

Digital-to-analog (D/A) converter: The part of a micropro-

cessor-based controller that changes digital values
from a software program to analog output signals
for use in the control system. The analog signals are
typically used to position actuators or actuate trans-
ducers and relays.

Direct digital control: A control loop in which a digital

controller periodically updates a process as a function
of a set of measured control variables and a given set
of control algorithms.

Microprocessor-based controller: A device consisting of a

microprocessor unit, digital input and output connec-
tions, A/D and D/A converters, a power supply, and
software to perform direct digital control and energy
management routines in a HVAC system.

Operating software: The main operating system and programs

that schedule and control the execution of all other
programs in a microprocessor-based controller. This
includes routines for input/output (I/O) scanning,
A/D and D/A conversion, scheduling of application
programs, and access and display of control program
variables.

System-level controller: A microprocessor-based controller

that controls centrally located HVAC equipment such
as variable air volume (VAV) supply units, built-up
air handlers, and central chiller and boiler plants. These
controllers typically have a library of control programs,
may control more than one mechanical system from a
single controller, and may contain an integral operating
terminal.

Zone-level controller: A microprocessor-based controller that

controls distributed or unitary HVAC equipment such
as VAV terminal units, fan coil units, and heat pumps.
These controllers typically have relatively few con-
nected I/O devices, standard control sequences, and
are dedicated to specific applications.

functions. A stand-alone controller can take several forms. The
simplest generally controls only one control loop while larger
versions can control from eight to 40 control loops. As the
systems get larger, they generally incorporate more
programming features and functions. This section covers the
controller as a stand-alone unit. Refer to the Building
Management System Fundamentals section for additional
information on use of the controller in networked and building
management systems.

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

Lawler 410 Installation & Maintenance Manual preview
410
Бренд: Lawler Страницы: 4
Calpeda IDROMAT 5 Quick Start Manual preview
IDROMAT 5
Бренд: Calpeda Страницы: 4
Omegalink 553 Quick Start Operation Manual preview
553
Бренд: Omegalink Страницы: 2
N-Com MCS II Instructions For Use Manual preview
MCS II
Бренд: N-Com Страницы: 20
N-Com BX5 User Instructions preview
BX5
Бренд: N-Com Страницы: 28
Safeline VA4 Operating Instructions Manual preview
VA4
Бренд: Safeline Страницы: 8
OEM BCM94319SDB Installation Manual preview
BCM94319SDB
Бренд: OEM Страницы: 8
ABB ACH580-04 Quick Installation Manual preview
ACH580-04
Бренд: ABB Страницы: 102
OPW PetroVend PV200 Options Installation preview
PetroVend PV200
Бренд: OPW Страницы: 2
Lantronix CWDM-CR-B Series User Manual preview
CWDM-CR-B Series
Бренд: Lantronix Страницы: 19
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Бренд: Netafim Страницы: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Бренд: TREND Страницы: 12
ZANTIA ZNT 140 M User Manual preview
ZNT 140 M
Бренд: ZANTIA Страницы: 12
Nordson Auto-Flo II Customer Product Manual preview
Auto-Flo II
Бренд: Nordson Страницы: 20
DCU Tecnologic 30902020 Quick Start Manual preview
30902020
Бренд: DCU Tecnologic Страницы: 2
zeeltronic PDCI-24V User Manual preview
PDCI-24V
Бренд: zeeltronic Страницы: 13
QD Dynamics Pi HSC505-32 User'S Information Manual preview
Pi HSC505-32
Бренд: QD Dynamics Страницы: 64
Gliderol TM390 Instructions preview
TM390
Бренд: Gliderol Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды