manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

ENGINEERING MANUAL OF AUTOMATIC CONTROL

PNEUMATIC CONTROL FUNDAMENTALS

62

From the PRV, the air flows through the main line to the

controller (in Figure 1, a thermostat) and to other controllers or
relays in other parts of the system. The controller positions the
actuator. The controller receives air from the main line at a constant
pressure and modulates that pressure to provide branchline air at
a pressure that varies according to changes in the controlled
variable, as measured by the sensing element. The controller signal
(branchline pressure) is transmitted via the branch line to the
controlled device (in Figure 1, a valve actuator). The actuator
drives the final control element (valve) to a position proportional
to the pressure supplied by the controller.

When the proportional controller changes the air pressure to

the actuator, the actuator moves in a direction and distance
proportional to the direction and magnitude of the change at
the sensing element.

RESTRICTOR

The restrictor is a basic component of a pneumatic control

system and is used in all controllers. A restrictor is usually a
disc with a small hole inserted into an air line to restrict the
amount of airflow. The size of the restrictor varies with the
application, but can have a hole as small as 0.08 millimeters.

NOZZLE-FLAPPER ASSEMBLY

The nozzle-flapper assembly (Fig. 3) is the basic mechanism

for controlling air pressure to the branch line. Air supplied to
the nozzle escapes between the nozzle opening and the flapper.
At a given air supply pressure, the amount of air escaping is
determined by how tightly the flapper is held against the nozzle
by a sensing element, such as a bimetal. Thus, controlling the
tension on the spring also controls the amount of air escaping.
Very little air can escape when the flapper is held tightly against
the nozzle.

To create a branchline pressure, a restrictor (Fig. 3) is

required. The restrictor and nozzle are sized so that the nozzle
can exhaust more air than can be supplied through the restrictor
when the flapper is off the nozzle. In that situation, the
branchline pressure is near zero. As the spring tension increases
to hold the flapper tighter against the nozzle, reducing the air
escaping, the branchline pressure increases proportionally.
When the spring tension prevents all airflow from the nozzle,
the branchline pressure becomes the same as the mainline
pressure (assuming no air is flowing in the branch line). This
type of control is called a “bleed” control because air “bleeds”
continuously from the nozzle.

With this basic mechanism, all that is necessary to create a

controller is to add a sensing element to move the flapper as
the measured variable (e.g., temperature, humidity, pressure)
changes. Sensing elements are discussed later.

PILOT BLEED SYSTEM

The pilot bleed system is a means of increasing air capacity

as well as reducing system air consumption. The restrictor and
nozzle are smaller in a pilot bleed system than in a nozzle-
flapper system because in a pilot bleed system they supply air
only to a capacity amplifier that produces the branchline
pressure (Fig. 4). The capacity amplifier is a pilot bleed
component that maintains the branchline pressure in proportion
to the pilot pressure but provides greater airflow capacity.

M

SENSOR
FORCE

FLAPPER

SPRING

BRANCH

RESTRICTOR

AIR SUPPLY

NOZZLE

C1084

Fig. 3. Nozzle-Flapper Assembly with Restrictor.

M

FLAPPER

NOZZLE

BLEED
VALVE

SPRING

VENT

C1085

BRANCH

BRANCH
CHAMBER

FEED 
VALVE
DISC

CAPACITY
AMPLIFIER

PILOT
CHAMBER

Fig. 4. Pilot Bleed System with Amplifier Relay.

The pilot pressure from the nozzle enters the pilot chamber

of the capacity amplifier. In the state shown in Figure 4, no air
enters or leaves the branch chamber. If the pilot pressure from
the nozzle is greater than the spring force, the pilot chamber

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

ABB ACS355 series Quick Start Up Manual preview
ACS355 series
Бренд: ABB Страницы: 139
ABB ACH400 Series Retrofit Manual preview
ACH400 Series
Бренд: ABB Страницы: 28
ABB TZIDC-110 Operating Instructions Manual preview
TZIDC-110
Бренд: ABB Страницы: 59
Ubisys J1 Manual preview
J1
Бренд: Ubisys Страницы: 2
Garmin 340 Pilot'S Manual preview
340
Бренд: Garmin Страницы: 12
Valor Plus Instructions Manual preview
Plus
Бренд: Valor Страницы: 20
Data I/O PSV5000 Operator'S Manual preview
PSV5000
Бренд: Data I/O Страницы: 88
Data Aire dap4 touch Protocol Manual preview
dap4 touch
Бренд: Data Aire Страницы: 13
Haldex PR Installation Manual preview
PR
Бренд: Haldex Страницы: 8
Talgil DREAM 2 Manual preview
DREAM 2
Бренд: Talgil Страницы: 14
Tadao Musashi 3 Upgrade preview
Musashi 3
Бренд: Tadao Страницы: 2
Raynor Smart Control Panel 880RGD Quick Manual preview
Smart Control Panel 880RGD
Бренд: Raynor Страницы: 4
Quickie DX2-REM550 User Manual preview
DX2-REM550
Бренд: Quickie Страницы: 64
Kamstrup 66-0F-000-100 Installation Manual preview
66-0F-000-100
Бренд: Kamstrup Страницы: 7
Danfoss VLTAutomationDrive FC 360 Quick Manual preview
VLTAutomationDrive FC 360
Бренд: Danfoss Страницы: 52
u-blox LARA-R203 System Integration Manual preview
LARA-R203
Бренд: u-blox Страницы: 157
Airlow CP Touch User Manual preview
CP Touch
Бренд: Airlow Страницы: 20
Zencontrol zc-controller Instructions preview
zc-controller
Бренд: Zencontrol Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды