manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

BUILDING MANAGEMENT SYSTEM FUNDAMENTALS

ENGINEERING MANUAL OF AUTOMATIC CONTROL

189

SYSTEM FUNCTIONS

GENERAL

Each BMCS level provides some degree of stand-alone

capability and collects and preprocesses data for other
processing levels. The following discussion starts with the
functions provided by the lowest level of processing in the
configuration, or hierarchy, and progresses to the highest level.

ZONE-LEVEL CONTROLLER FUNCTIONS

The primary function of the zone-level controller is to

provide direct digital control of unitary equipment. To support
the resident DDC programs, the zone-level controller interfaces
with sensors and actuators and performs the functions of point
processing as well as execution of the DDC programs.

SYSTEM-LEVEL CONTROLLER
FUNCTIONS

System-level controllers provide increased processing

capability, higher I/O capacity, and more universal application
flexibility than zone-level controllers and have greater stand-
alone capability. System-level controllers handle multiple
DDC loops and the complex control sequences associated with
built-up air handling units and other HVAC equipment. Other
types of system-level controllers monitor multiple zones of
fire alarm, security points, and/or lighting control. They can
also provide emergency evacuation control through speakers
and control personnel movement with access control and card
readers. For a detailed description of system-level controllers,
refer to Microprocessor-Based/DDC Fundamentals section.

Processed point data at the system controller level is used

directly by the resident DDC, EMS, and time/event programs.
The data is also available for readout at local control panels,
portable terminals, and can be communicated up to the
operations-level processor and to other system-level
controllers. In addition, all parameters and output values
associated with DDC and other resident programs are
accessible for local and operations-level readout and
adjustment. Data point values may be shared between zone-
level controllers, between system-level controllers, and
between zone- and system-level controllers.

OPERATIONS-LEVEL FUNCTIONS

GENERAL

The operations level is the third tier of the BMCS

configuration.  Building or facility operations and
management personnel interact on a day-to-day basis through
this level. The hardware and software for this tier is dedicated

to interfacing with operating personnel rather that with
mechanical systems, as the controllers do in the lower tiers
of the BMCS configuration.

HARDWARE

The operations-level processor supplies the processing

capacity and memory required for all communications and
operator interface software as well as the peripheral capacity
for dedicated alarm and report printers and work stations It is
usually a PC consisting of:

— Full keyboard, with mouse or other entry device.
— High resolution color monitor.
— RAM or working memory.
— Hard disk memory.
— Diskette drive.
— Multiple peripheral ports.
— Communications interface boards.
— At least one printer.

SOFTWARE

While hardware enables operator interaction and the

display and printout of data, the software determines how
the interaction takes place, the data is displayed, and the printer
output is formatted.

Standard Software

Most BMSs run under Microsoft Windows™ and use

standard mouse conventions, such as drop-down menus, dialog
boxes, radio buttons, and up-down arrows. Many systems allow
the use of other standard Windows compatible programs such
as word processors, spread sheets, and data bases to operate
concurrently with the BMS. In such cases, a BMS alarm
overwrites the monitor screen until acknowledged and canceled.

Other standard programs are often embedded in BMS

software. A spread sheet may be an integral part of the trend
report utility. This allows the operator not only to view the output
of the requested report, but to review and edit it in the
spreadsheet format. The spread sheet also can be called up as a
stand-alone utility. System graphics are usually based upon
standard graphics software.

Communications Software

Software at the operations level communicates with all

system- and zone-level processors in a peer-to-peer fashion.
Communications functions include:

— Receiving alarm and return-to-normal reports (including

remote device communications failures).

— Receiving trend status’ and values.
— Passing global data and alarm reports to other devices

on the ETHERNET LAN.

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

ABB Relion REC670 Product Manual preview
Relion REC670
Бренд: ABB Страницы: 138
ABB Relion REC670 Operator'S Manual preview
Relion REC670
Бренд: ABB Страницы: 116
ABB Relion 615 series Operation Manual preview
Relion 615 series
Бренд: ABB Страницы: 136
jablotron Oasis JA-80 Installation Manual preview
Oasis JA-80
Бренд: jablotron Страницы: 22
jablotron JA-113E Manual preview
JA-113E
Бренд: jablotron Страницы: 2
Nedap WIM Installation Manual preview
WIM
Бренд: Nedap Страницы: 20
Radware Alteon Installation And Maintenance Manual preview
Alteon
Бренд: Radware Страницы: 98
RabbitCore RCM2200 Getting Started Manual preview
RCM2200
Бренд: RabbitCore Страницы: 34
Magicfx FX-COMM4NDER MFX3203 User And Installation Manual preview
FX-COMM4NDER MFX3203
Бренд: Magicfx Страницы: 16
Desoutter 6159326760 Original Instructions Manual preview
6159326760
Бренд: Desoutter Страницы: 74
jablotron CL-301SL Quick Start Manual preview
CL-301SL
Бренд: jablotron Страницы: 2
TWR Lighting E-1DB2 Manual preview
E-1DB2
Бренд: TWR Lighting Страницы: 49
M-system R7ML-TS4 Instruction Manual preview
R7ML-TS4
Бренд: M-system Страницы: 10
Auber WS-1500FXL Operation & Instruction Manual preview
WS-1500FXL
Бренд: Auber Страницы: 3
Netro SPRITE Quick Start Manual preview
SPRITE
Бренд: Netro Страницы: 14
Dudley Wave S3 Manual preview
Wave S3
Бренд: Dudley Страницы: 8
HydroQuip PLATINUM PS-9003 Installation & Operation Manual preview
PLATINUM PS-9003
Бренд: HydroQuip Страницы: 24
Pentair FLECK 5810 XTR2 Service Manual preview
FLECK 5810 XTR2
Бренд: Pentair Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды