manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

ENGINEERING MANUAL OF AUTOMATIC CONTROL

INDIVIDUAL ROOM CONTROL APPLICATIONS

412

In the  “dr aw-thr ough”  unit v entila tor (F ig. 21) the fan dr aws

filter ed outdoor and r etur n air acr oss the coil and b lows the
conditioned air into the space.

Face and b ypass damper s ar e frequentl y found on unit

ventila tor s wher ein the r oom contr oller modula tes the damper s,
and the coil v alve closes after the f ace damper is c losed.

CONTROL 

Unit ventila tor contr ol regula tes the amount of outdoor air

introduced into a space and the amount of heating or cooling
medium required to heat or cool the room. Day/night systems
can lo wer the setpoint and c ycle the f an dur ing unoccupied
hour s to maintain minim um temper atur es and sa ve ener gy.

ASHRAE Contr

ol Cycles 

ASHRAE c lassifies the contr ol of unit v entila tor s as follows:

— Standby/Warmup Stage (can be used with any of the

following cycles)

— Cycle I–Fixed Maximum Percentage of Outdoor Air
— Cycle II–Fixed Minimum Percentage of Outdoor Air
— Cycle III–Variable Outdoor Air

These classes, defined around the 1950’s, simplified the

specifications for unit ventilators, unit ventilator controls and
sequences, and the factory mounting of control components.
These cycle definitions are for heating only, although ASHRAE
recognized that cooling coils may also be required. Cycles I,
II, and III differ in the sequence of damper action in response
to a rise in space temperature and in the amount of outdoor air
admitted at various temperatures. ASHRAE control cycles may
be implemented by pneumatic, electric, electronic, or digital
control.

STANDBY/WARMUP STAGE

Dur ing cold r oom per iods, all thr ee cycles position the v alves

and damper s the same . Figur e 23 shows the standb y/war mup
stage in which the unit v entila tor f an is shut do wn (man ually or
by time clock). The outdoor air damper is c losed, and the r etur n
air damper is full open.  The hea ting coil valve is open. The coil
acts as a con vector as air cir cula tes b y convection acr oss the
coil. The r oom ther mosta t modula tes the v alve, closing the v alve
as space temper atur e r ises above setpoint.  The fan does not
oper ate in the standb y stage. Dur ing the w ar mup sta ge, the f an
ener gizes and the unit r ecircula tes space air f or a r apid r ise in
space temper atur e. The ther mosta t signal oper ates the v alve to
control the heat.

Fig. 21. Draw-Through Unit Ventilator.

Some unit v entila tor s use separ ate hea ting and cooling coils

or a combina tion hot-w ater/c hilled-water coil. F igur e 22 shows
a typical air conditioning unit v entila tor with tw o separ ate coils.
The hea ting medium ma y be hot w ater, steam,  or electr ic
resistance elements, and the cooling medium may be chilled
water or DX r efrigerant. If hea ting and cooling sour ces ar e both
water, they ar e sometimes combined in a single coil b y pr oviding
separ ate sections of the coil f or eac h function.  With DX cooling ,
the condensing unit ma y be an inte gral par t of the unit v entila tor
or may be remotely located.

C3036

DISCHARGE 
AIR

WALL

OUTDOOR
AIR

MIXING

DAMPER

RETURN
AIR

FACE AND
BYPASS
DAMPER

FILTER

HEATING 
COIL

FAN

Fig. 22. Unit Ventilator with Separate

Heating and Cooling Coils.

C3035

DISCHARGE 
AIR

WALL

OUTDOOR
AIR

MIXING

DAMPERS

RETURN
AIR

COOLING 
COIL

DRAIN PAN

FILTER

HEATING 
COIL

FAN

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
XOXO Modular IXO Operation Manual And Installation Manual preview
IXO
Бренд: XOXO Modular Страницы: 13
Balboa Water Group BP Series User Interface And Programming Reference Manual preview
BP Series
Бренд: Balboa Water Group Страницы: 28
Samsung SolarCell Remote Instructions preview
SolarCell Remote
Бренд: Samsung Страницы: 2
Samsung MWR-SH11N Installation Manual preview
MWR-SH11N
Бренд: Samsung Страницы: 20
Wavelink Avalanche User Manual preview
Avalanche
Бренд: Wavelink Страницы: 69
CALEFFI 145 Series Installation And Commissioning Manual preview
145 Series
Бренд: CALEFFI Страницы: 12
CALEFFI QuickSetter+ 132 Series User Manual preview
QuickSetter+ 132 Series
Бренд: CALEFFI Страницы: 5
FASAR ELETTRONICA FE230 Quick Start Manual preview
FE230
Бренд: FASAR ELETTRONICA Страницы: 2
Faro Barcelona 33929 Installation Manual preview
33929
Бренд: Faro Barcelona Страницы: 8
Faro 33928 Installation Manual preview
33928
Бренд: Faro Страницы: 3
YASKAWA G7 Series Technical Manual preview
G7 Series
Бренд: YASKAWA Страницы: 456
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Бренд: National Instruments Страницы: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Бренд: National Instruments Страницы: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Бренд: National Instruments Страницы: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Бренд: National Instruments Страницы: 24
National Instruments NI 9469 Getting Started preview
NI 9469
Бренд: National Instruments Страницы: 13
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Бренд: National Instruments Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды