manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

ENGINEERING MANUAL OF AUTOMATIC CONTROL

INDOOR AIR QUALITY FUNDAMENTALS

164

ASHRAE GUIDELINE 1-1989

ASHRAE Guideline 1-1989 for commissioning HVAC

systems defines commissioning as “documenting and
verifying the performance of HVAC systems so that systems
operate in conformity with the design intent.” This
guideline, in conjunction with ASHRAE Standard 62-1989,
is a major tool for eliminating IAQ problems. The
commissioning guideline, if implemented, requires system
design and construction processes to ensure and facilitate
implementing the verification process.

The commissioning process starts in the program

development phase with owner buy in and continues throughout
the schematic, design development, and construction phases
of the pre-acceptance phase. The process includes clearly
defined additional contractor responsibilities. Following the
process during the preacceptance phase allows the acceptance
phase to accomplish the desired goals.

The design phases of the commissioning process ensure that

the systems will perform their intended functions. The
construction phase ensures that the systems are installed to

deliver the design. The acceptance phase of the process
demonstrates that the systems work as designed. Documentation
requirements of the process ensure that the building operators
know the design intent of the systems and how they are to be
operated. This process is intended to ensure that owner changes
are recommissioned.

The documentation, required by both ASHRAE Standard

62-1989 and Guideline 1-1989, provides the information
necessary for proper operation and maintenance of the HVAC
systems. The commissioning process requires the involvement
of operating and maintenance personnel in the Acceptance
process to ensure understanding of the design intent and
operational requirements of the systems. Personnel turnover
requires extensive additional training.

Assuming adequate funding of the operations and

maintenance staff, the systems will deliver the design
performance throughout the intended life cycle. Any alternations
required by changes in occupancy requirements need to be
correctly integrated into the system design through the use of a
post commissioning process.

INDOOR AIR QUALITY CONTROL APPLICATIONS

The following control system drawings appear fairly simple

because they illustrate hardware only. The triangles represent
physical connections to a DDC control panel. The related
control functions are all in software programs and need to be
shown on graphic displays for the engineer and building
operator to visualize system operation. Refer to the OPERATOR
INTERFACE and GRAPHIC DISPLAYS topics for a
discussion of a typical operator interface.

For additional information on related control applications

and DDC, refer to the following manual sections of this manual:

— Air Handling System Control Applications
— Building Airflow System Control Applications
— Microprocessor-Based/DDC Fundamentals

GENERAL

To provide appropriate IAQ it is essential to maintain the

building pressure slightly positive to prevent infiltration.
Minimum and maximum air flows must be maintained to assure
proper air distribution and internal pressurization zones.
Terminal regulated air volume control of the supply fan should
match the output to the load with a minimum input of energy.
Use of Direct Digital Control (DDC) and related software
capabilities can be used to provide control and provide
information to the operator to permit better IAQ control and
operator comprehension.

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

Radio Shack 4 Owner'S Manual preview
4
Бренд: Radio Shack Страницы: 52
Parasound 7100 Owner'S Manual preview
7100
Бренд: Parasound Страницы: 72
Jafar 7010 Operation And Maintenance Manual preview
7010
Бренд: Jafar Страницы: 15
Danfoss vlt soft starter mcd 500 Operating Instruction preview
vlt soft starter mcd 500
Бренд: Danfoss Страницы: 95
Danfoss EKE 347 Installation Manual preview
EKE 347
Бренд: Danfoss Страницы: 12
Danfoss VLT 5000 Instruction Manual preview
VLT 5000
Бренд: Danfoss Страницы: 33
Danfoss VLT 6000 Installation Manual preview
VLT 6000
Бренд: Danfoss Страницы: 59
Danfoss EKC 361 User Manual preview
EKC 361
Бренд: Danfoss Страницы: 16
Danfoss VLT AQUA Drive FC 200 Operating Instructions Manual preview
VLT AQUA Drive FC 200
Бренд: Danfoss Страницы: 91
Danfoss EvoFlat WSS Installation Manual preview
EvoFlat WSS
Бренд: Danfoss Страницы: 2
Danfoss FC 300 Operating Instructions Manual preview
FC 300
Бренд: Danfoss Страницы: 100
Danfoss FC 300 Operating Instruction preview
FC 300
Бренд: Danfoss Страницы: 82
Danfoss Optyma Plus User Manual preview
Optyma Plus
Бренд: Danfoss Страницы: 18
Danfoss AMV 438 SU Installation Manual preview
AMV 438 SU
Бренд: Danfoss Страницы: 12
Danfoss OPTYMA Plus OP-LPQM Manual preview
OPTYMA Plus OP-LPQM
Бренд: Danfoss Страницы: 8
East Coast Datacom DMM-X21 Operation Manual preview
DMM-X21
Бренд: East Coast Datacom Страницы: 14
EOS Farblichtmodul Assembly Instruction Manual preview
Farblichtmodul
Бренд: EOS Страницы: 7
Eaton XIOC-NET-DP-M Instruction Leaflet preview
XIOC-NET-DP-M
Бренд: Eaton Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды