manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Инструкция по эксплуатации

"Инженерное руководство Honeywell AUTOMATIC CONTROL SI Edition теперь доступно для загрузки бесплатно на manualshive.com. Этот инновационный продукт обеспечивает автоматический контроль и управление, упрощая процессы. Скачайте руководство прямо сейчас и узнайте больше о возможностях этого устройства."

Поделиться
Скачать
background image

ENGINEERING MANUAL OF AUTOMATIC CONTROL

BUILDING MANAGEMENT SYSTEM FUNDAMENTALS

196

INTEGRATION OF OTHER SYSTEMS

GENERAL

Information from other subsystems, such as fire alarm,

security, access control, or lighting control, may be required
in the BMS. This can be achieved through system integration.
There are two ways to integrate these systems: surface
integration and in-depth integration. These subsystems are
not described here but are mentioned because of their
importance in the BMS architecture.

SURFACE INTEGRATION

A surface integrated subsystem is a stand-alone system which

provides certain point information to the BMS. See Figure 10.
The subsystem transmits alarm and status information through
multiple point connections hardwired to a local BMS panel.
The BMS processes and displays that data as auxiliary
information or uses it as inputs to resident programs such as
time/event sequences. Every input desired in the BMS requires
a separately wired point from the subsystem. Since these
subsystems are stand-alone systems, they have an operator
interface which can be monitored separately from the BMS
monitor. There are cases where a second window in the BMS
terminal display is dedicated to the operation of the connected
subsystem. This usually requires only a standard link to the
BMS terminal. In this case, the terminal is shared but no
information is passed to the BMS for use in operations.
Additionally, the display for the subsystem will generally be
entirely different in format from the display for the rest of the
BMS. Consequently, this type of integration is of limited use.

The advantage of surface integration is that limited

subsystem information is made available to the BMS. This
type of integration is generally used to tie in existing systems to
eliminate the need to replace functioning equipment.

The disadvantages of surface integration are:

— Higher first cost because of duplicated equipment and

increased installation to connect the two systems

— Interconnection between systems is not supervised and

could fail without notifying the central

— Independent operations staffs may be required for

monitoring each subsystem

IN-DEPTH INTEGRATION

Figure 11 shows a system with in-depth integration. System-

level controllers communicate over a common bus for each
subsystem. These processors are designed to operate as stand-
alone systems if the communication link with the operations-
level processor fails. The system-level controllers for fire and
security subsystems can also provide outputs for local
annunciation if required by applicable codes. All data is
accessible through all PC stations, however all operators need
not be authorized to access all data. All of the subsystems are
tied together through software. Information can also be passed
to additional buses containing other subsystems such as
lighting control for true global control. This communication
is essential for some operations such as smoke control. Even
when multiple buses are used, a common display format and
centralized collection and dissemination of information
throughout the system provides for a more reliable, smoother
operating system.

Recently, open standard communications protocols have been
invented and adopted by the building control and related control
industries. Theses standards, such as BACnet and LonMark™,
will make in-depth integration of products and systems from
multiple vendors, and from multiple industries, much easier
resulting in lower cost and more functional integrations.

Fig. 10. Surface Integrated System.

OPERATIONS-

LEVEL

PROCESSOR

SYSTEM-LEVEL

PROCESSOR

SENSORS

AND 

ACTUATORS

PROCESSOR

CRT

TERMINAL

PRINTER

BUILDING MANAGEMENT

SYSTEM

FIRE ALARM

SYSTEM

C1868

HARDWIRED  CONNECTIONS

BMS

PANEL

BMS

PANEL

OPERATOR

INTERFACE

FIRE

ALARM

PANEL

Содержание AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AUTOMATIC CONTROL SI Edition

ABB REC650 ANSI Applications Manual preview
REC650 ANSI
Бренд: ABB Страницы: 370
ABB EAN823 Instructions Manual preview
EAN823
Бренд: ABB Страницы: 17
ABB COM600 series User Manual preview
COM600 series
Бренд: ABB Страницы: 104
ABB AC 800M Library Object Style Manual preview
AC 800M
Бренд: ABB Страницы: 120
ABB ABILITY SSC600 Product Manual preview
ABILITY SSC600
Бренд: ABB Страницы: 42
jablotron RC-40 Manual preview
RC-40
Бренд: jablotron Страницы: 2
LAE electronic LF28 Instructions For Installation And Use Manual preview
LF28
Бренд: LAE electronic Страницы: 7
LAE electronic AT1-5 Instructions For Use preview
AT1-5
Бренд: LAE electronic Страницы: 2
OMA 526 Instruction Manual For Using And Maintaining preview
526
Бренд: OMA Страницы: 53
Omegalink 553 Quick Start Operation Manual preview
553
Бренд: Omegalink Страницы: 2
N-Com MCS II Instructions For Use Manual preview
MCS II
Бренд: N-Com Страницы: 20
N-Com BX5 User Instructions preview
BX5
Бренд: N-Com Страницы: 28
Eaton EZD Series User Manual preview
EZD Series
Бренд: Eaton Страницы: 448
Eaton EC4E-221-6D4T1 Hardware And Engineering preview
EC4E-221-6D4T1
Бренд: Eaton Страницы: 57
Omron SYSMAC C500-NC222-E Operation Manual preview
SYSMAC C500-NC222-E
Бренд: Omron Страницы: 164
National Instruments SCC-DO01 User Manual preview
SCC-DO01
Бренд: National Instruments Страницы: 14
M-system R7F4DC-DA16A-H Instruction Manual preview
R7F4DC-DA16A-H
Бренд: M-system Страницы: 7
Bardiani Valvole BBWMF1 Instruction, Use And Maintenance Manual preview
BBWMF1
Бренд: Bardiani Valvole Страницы: 118

Бренды по названию

Популярные бренды

Загрузить еще бренды