manualshive.com logo in svg

Holzstar 5904026, Руководство по эксплуатации

"Вам нужно найти руководство по эксплуатации для Holzstar 5904026? Скачайте бесплатно этот руководство по эксплуатации с нашего сайта manualshive.com. Этот manual поможет вам разобраться с функционалом и правильной настройкой вашего инструмента Holzstar 5904026."

Поделиться
Скачать
background image

Indended Use

ADH-Series | Version 1.02

9

3

Indended Use

The Planer-Thicknesser is designed for dressing and pla-
ning boards and mouldings made of solid wood or similar 
wood materials, e.g. wood fibre surfaces, boards made of 
wood parts, chipboards, plywood, laminated and non-lami-
nated surfaces with rectangular or square cross section. 
The permissible dimensions of the workpieces must be ob-
served. Machining of other materials is not intended and 
not permitted. The machine is designed for operation by 
only one worker.

The machine must be operated with a suitable extraction 
system. It is suitable for private use, not for industrial use. 

Intended use also includes compliance with all the informa-
tion in these instructions. Any use beyond the intended use 
or any other use is considered misuse.

Every workpiece must be inspected for foreign objects 
such as screws or nails before machining. The planer-
thicknesser is designed and built for use in a non-hazar-
dous environment. If the planer-thicknesser is used in a 
different way than mentioned above, if it is modified 
without the approval of HOLZSTAR®woodworking ma-
chines, the planer-thicknesser will no longer be used as 
intended.

All persons involved in installation, commissioning, ope-
ration and maintenance must have the necessary quali-
fications to observe these operating instructions exactly. 
In case of improper use may cause danger to persons, 
the planer thickness and other material assets can be 
endangered, the function of the dressing plane may be 
impaired.

Stürmer Maschinen GmbH assumes no liability for con-
structive and technical changes to the planer thicknes-
ser. Claims of any kind for damage due to improper use 
are excluded.

4

Technical Data

4.1 Operating conditions

The machine is not intended for outdoor use.

The machine is not intended for operation under explo-
sive conditions.

4.2 Type plate

Fig. 2: Type plate ADH 26 C

WARNING!
Danger in case of misuse!

A misuse of the Planer-Thicknesser can result in 
dangerous situations. 
-  Only operate the Planer-Thicknesser in the power 

range given in the technical specifications. 

-  Never operate the machine without the safety de-

vices.

-  Never work up other materials that do not correspond 

to those which are required for the intended use.

-  Only operate the Planer-Thicknesser in a techni-

cally flawless status.

-  Never machining several workpieces at the same 

time.

WARNING!

Severe injuries due to improper use.

Modifications and changes to the operating values of 
the planer are prohibited. They endanger people 
and can cause damage to the planer.
Always keep the operating instructions close to the 
planer.

WARNING!

The planer-thicknesser may only be operated with 
functioning safety devices.
Switch off the planer immediately if you discover that 
a safety device is faulty or has been dismantled!
All additional equipment provided by the operator 
must be equipped with the prescribed safety 
devices. must be equipped.

You as the operator are responsible for this!

relative humidity  

30% to90%

Operating temperature range +5°C 

to 

+40°C

max. height above sea level 

1000 m 

Содержание 5904026



























































Отзывы:

Нет отзывов

Похожие инструкции для 5904026

Jensen XCH 6RF Operation preview
XCH 6RF
Бренд: Jensen Страницы: 7
auna 10037490 Manual preview
10037490
Бренд: auna Страницы: 76
Soulution SACD-Player 746 User Manual preview
SACD-Player 746
Бренд: Soulution Страницы: 28
Craftsman 351.217890 Operator'S Manual preview
351.217890
Бренд: Craftsman Страницы: 24
Craftsman 351.233780 Operator'S Manual preview
351.233780
Бренд: Craftsman Страницы: 28
Craftsman 172.267290 Operator'S Manual preview
172.267290
Бренд: Craftsman Страницы: 11
Craftsman 315.277160 Owner'S Manual preview
315.277160
Бренд: Craftsman Страницы: 16
Craftsman 351.217020 Operator'S Manual preview
351.217020
Бренд: Craftsman Страницы: 24
Craftsman 351.233831 Operator'S Manual preview
351.233831
Бренд: Craftsman Страницы: 32
Craftsman 351.217430 Operator'S Manual preview
351.217430
Бренд: Craftsman Страницы: 32
Craftsman 351.217330 Operator'S Manual preview
351.217330
Бренд: Craftsman Страницы: 40
Craftsman 149.236321 Owner'S Manual preview
149.236321
Бренд: Craftsman Страницы: 16
Craftsman 113.232210 Owner'S Manual preview
113.232210
Бренд: Craftsman Страницы: 46
Craftsman 113.20680 Owner'S Manual preview
113.20680
Бренд: Craftsman Страницы: 32
Craftsman 113.232240 Owner'S Manual preview
113.232240
Бренд: Craftsman Страницы: 40
Craftsman 351.275210 Operator'S Manual preview
351.275210
Бренд: Craftsman Страницы: 20
Craftsman 351.226151 Operator'S Manual preview
351.226151
Бренд: Craftsman Страницы: 32
Craftsman 152.217060 Owner'S Manual preview
152.217060
Бренд: Craftsman Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды