Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Driving and Operating
227
Unique acoustic warning signals
sound for the front and rear
monitoring areas, each with a
different tone frequency.
The system uses ultrasonic parking
sensors located in the rear and front
bumpers.
{
Warning
The driver is always responsible
for taking care and attention while
manoeuvring the vehicle. The PA
(Continued)
Warning (Continued)
is only an aid and is neither
intended to, nor able to take over
any responsibility.
The park sensors may not be
able to detect all objects under
every condition, e.g. objects too
close to the vehicle, objects
above or below the sensors,
or objects with a surface that
absorbs ultrasonic waves.
Additionally, some ambient
conditions like ultrasonic waves
or heavy rain can cause
disruptive reflections from an
object's surface. Such objects
may not be detected.
Always manoeuvre the vehicle
slowly to allow yourself sufficient
time to react. The warning tones
will sound only while the vehicle's
speed is below 8 km/h.
Activation
After the ignition is switched on,
when reverse gear is engaged, the
front and rear parking assist is
ready to operate. The front parking
assist is activated automatically at a
speed up to 8 km/h.
An illuminated LED in the parking
assist button
X
indicates that the
system is ready to operate.
If
X
is switched off within an
ignition cycle, the front parking
assist is deactivated. If vehicle
speed has exceeded 25 km/h
beforehand, parking assist will be
reactivated when speed drops
below 8 km/h.
When the system is deactivated, the
LED in the button extinguishes and
Park Assist Off pops-up in the
Driver Information Centre (DIC).