Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Lighting
117
5
:
Additionally turns on the
headlamps.
High Beam Assist
If equipped, High Beam Assist turns
the vehicle's high-beam headlamps
on and off automatically when it is
dark enough and there is no other
traffic present.
This light comes on in the
instrument cluster when High Beam
Assist is enabled.
Enabling High Beam Assist
Press
b
on the turn signal lever
when it is dark outside and the
exterior lamp control is in AUTO
or
5
. The blue high-beam on light
is displayed on the instrument
cluster when high beams are on.
Driving with High Beam Assist
The system only activates high
beams when driving over 50 km/h.
There is a sensor near the top
centre of the windscreen that
automatically controls the system.
Keep this area of the windscreen
clear of debris for best system
performance.
The high-beam headlamps remain
on, under automatic control, until
one of the following situations
occurs:
.
The system detects an
approaching vehicle's
headlamps.
.
The system detects a preceding
vehicle's tail lamps.
.
The outside light is bright
enough that high-beam
headlamps are not required.
.
The vehicle's speed drops below
35 km/h.
.
Use the button on the turn signal
lever to disable High Beam
Assist.
.
The front fog lamps are
turned on.
High beams may not turn off
automatically if the system cannot
detect another vehicle's headlamps
or tail lamps due to any of the
following:
