Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Driving and Operating
213
A green ACC indicator and the set
speed display on the instrument
cluster. The vehicle ahead indicator
may be flashing if a vehicle ahead
was present and moved. See
“
Approaching and Following a
Vehicle
”
later in this section.
Once ACC has resumed, if there is
no vehicle ahead, if the vehicle
ahead is beyond the selected
following-gap, or if the vehicle has
exited a sharp curve, then the
vehicle speed will increase to the
set speed.
Increasing Speed While ACC is
at a Set Speed
If ACC is already activated, do one
of the following:
.
Use the accelerator to increase
speed. Move the thumbwheel
down toward SET
–
. Release
the control and the accelerator
pedal. The vehicle will now
cruise at the higher speed.
When the accelerator pedal is
pressed, ACC will not brake
because it is overridden. The
ACC indicator on the instrument
panel will illuminate blue.
.
Hold the thumbwheel up toward
RES+ until the desired set
speed appears on the display,
then release it.
.
To increase vehicle speed in
small increments, briefly move
the thumbwheel up toward RES
+. For each press, the vehicle
increases speed by
about 1 km/h.
The set speed can also be
increased while the vehicle is
stopped.
.
If stopped with the brake
applied, move the thumbwheel
up toward RES+ until the
desired set speed is displayed.
.
If ACC is holding the vehicle at a
stop and there is another vehicle
directly ahead, moving the
thumbwheel up toward RES+
will increase the set speed.
Moving the thumbwheel up
toward RES+ when there is no
longer a vehicle ahead will
cause ACC to resume.
When it is determined there is no
vehicle ahead or the vehicle ahead
is beyond the selected
following-gap, then the vehicle
speed will increase to the set speed.
Reducing Speed While ACC is
at a Set Speed
If ACC is already activated, do one
of the following:
.
Use the brake to reduce speed.
Release the brake and move the
thumbwheel down toward SET
–
. The vehicle will now cruise at
the lower speed.
.
Hold the thumbwheel down
toward SET
–
until the desired
lower speed is reached, then
release it.
.
To decrease the vehicle speed in
smaller increments, briefly move
the thumbwheel down toward
SET
−
. For each press, the
vehicle reduces speed by
about 1 km/h.