Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
152
Infotainment System
In general there are flexible ways to
speak commands for completing
tasks.
Try stating a One-Shot command,
such as
“
Directions to address
<house number, street, city,
country>
”
. This type of destination
entry command is supported in
some languages. Another example
of a One-Shot Destination Entry
command is,
“
Directions to Place of
Interest at <hotel>
”
. If these
commands do not work, try saying,
“
Take me to Place of Interest
”
or
“
Find address
”
and the system will
walk you through by asking
additional questions.
Using Voice Recognition
Voice recognition becomes available
once the system has been
initialised. This begins when the
ignition is turned on. Initialisation
may take a few moments.
1. Press
g
on the steering wheel
controls to activate voice
recognition.
2. The audio system mutes and
the system plays a prompt
followed by a beep.
3. Wait until after the beep
completes, then clearly speak
one of the commands
described in this section.
A voice recognition system
prompt can be interrupted while
it is playing by pressing
g
again.
For example, if the prompt
seems to be taking too long to
finish, to speak the command
without waiting for the prompt
to complete, press
g
again and
wait for the beep.
There are three voice prompt modes
supported:
.
Informative verbal prompts: This
type of prompt will provide more
information regarding the
supported actions.
.
Short prompts: This type of
prompt will provide simple
instructions about what can be
stated.
.
Auto informative prompts: This
type of prompt plays during the
first few speech sessions, then
automatically switches to the
short prompt after some
experience has been gained
through using the system.
If a command is not spoken, the
voice recognition system says a
help prompt.
Prompts and Infotainment
Displays
While a voice recognition session is
active, there may be corresponding
options showing on the displays.
A selection can be made by
manually touching the option, or by
speaking the number for the option
to select. Manual interaction in the
voice recognition session is
permitted. Interaction during a voice
session may be completed entirely
using voice commands while some
manual commands may expedite a
task. If a selection is made using a
manual control, the voice
recognition dialog will progress in
the same way as if the selection
were made using a voice command.