Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Driving and Operating
209
Manual Speed Limiter
Press the
s
button. The
s
light
on the instrument cluster will
illuminate white.
Manually set the maximum driving
speed by moving the thumbwheel
down toward SET
−
or up toward
+RES. The desired maximum speed
will remain displayed next to the
s
light, which will change from white
to green. See
“
Adjusting Set
Maximum Speed
”
later in this
section.
If the
s
light is on when the
system is not in use, the
thumbwheel could be accidentally
moved and the system go into
speed limiting mode when not
desired. Turn the speed limiter off
when speed limiting is not
being used.
If the maximum driving speed is
exceeded without the accelerator
being firmly pressed, a chime will
sound and the maximum set speed
will flash on the instrument cluster.
To override the maximum driving
speed, firmly press the accelerator.
The maximum set speed will flash
on the instrument cluster.
Press
*
to cancel the current set
speed. The
s
light will illuminate
white.
Press
s
to turn the speed limiter
off. The
s
light will turn off.
Automatic Speed Limiter
Press the
s
button. The
s
light
will illuminate white. Press the
s
button again to enter automatic
speed limiting mode.
When automatic speed limiting is
activated, a brief pop-up will appear
with the detected speed limit. To
accept the speed limit, move the
thumbwheel down toward SET
−
. To
decline the speed limit, move the
thumbwheel up RES. If no
action is taken, the speed limit will
be automatically accepted after a
short period of time. After accepting
the speed limit, the
s
light will
change from white to green and the
speed limiter can be set up to
8 km/h above or below the speed
limit. See
“
Adjusting Set Maximum
Speed
”
later in this section.
If the maximum driving speed is
exceeded without the accelerator
being firmly pressed, a chime will
sound and the maximum set speed
will flash on the instrument cluster.
To exceed the maximum driving
speed, firmly press the accelerator.
The maximum set speed will flash
on the instrument cluster.
Press
*
to cancel the current set
speed. The
s
light will illuminate
white.
Press
s
to turn the speed limiter
off. The
s
light will turn off.
Adjusting Set Maximum Speed
To adjust the maximum speed when
the speed limiter function is already
activated:
.
Move the thumbwheel down
toward SET
−
or up RES
until the desired speed is