Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
208
Driving and Operating
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See
.
Resuming a Set Speed
If the cruise control is set at a
desired speed and the brakes are
applied or
*
is pressed, the cruise
control is disengaged without
erasing the set speed from memory.
Once the vehicle speed reaches
about 40 km/h or more, briefly press
+RES. The vehicle returns to the
previous set speed.
Increasing Speed While Using
Cruise Control
If the cruise control system is
already activated:
.
Press and hold +RES on the
steering wheel until the vehicle
accelerates to the desired
speed, then release it.
.
To increase the speed in small
increments, briefly press +RES.
For each press, the vehicle goes
about 1 km/h faster.
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
.
Press and hold -SET until the
desired lower speed is reached,
then release it.
.
To slow down in small
increments, briefly press -SET.
For each press, the vehicle goes
about 1 km/h slower.
Ending Cruise Control
There are four ways to end cruise
control:
.
Press the brake pedal lightly.
.
Press
*
.
.
Shift the transmission to
N (Neutral).
.
Turn off cruise control, press
5
.
Erasing Speed Memory
The cruise control set speed is
erased from memory if
5
is pressed
or if the ignition is turned off.
Speed Limiter
The speed limiter function can be
used to set a maximum speed when
cruise control or Adaptive Cruise
Control (ACC) is not in use. The
speed limiter can help prevent
unintentionally driving above the
selected set speed. The speed can
be set automatically or manually
using the steering wheel controls.