Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
294
Vehicle Care
Warning (Continued)
towel can be used; however, use
a scraper or wire brush later to
remove all rust or dirt.
11. Remove any rust or dirt from
the wheel bolts, mounting
surfaces, and spare wheel.
12. Place the compact spare tyre
on the wheel-mounting surface.
{
Warning
Never use oil or grease on bolts
or nuts because the nuts might
come loose. The vehicle's wheel
could fall off, causing a crash.
13. Reinstall the wheel nuts.
Tighten each nut by hand until
the wheel is held against
the hub.
14. Lower the vehicle by turning
the jack handle anticlockwise.
{
Warning
As soon as possible after
changing a wheel, have the wheel
nuts tightened with a torque
wrench to 140 Nm (Newton
metres).
Wheel nuts must be tightened
evenly to the correct torque in the
sequence shown, as wheel nuts
which have not been tightened
(Continued)
Warning (Continued)
properly could eventually allow
the wheel to come off while the
vehicle is moving.
15. Tighten the wheel nuts firmly in
a criss-cross sequence, as
shown.
16. Lower the jack all the way and
remove the jack from under the
vehicle.
17. Tighten the wheel nuts firmly
with the wheel wrench.
