HOLDEN MY19 AC Acadia, Руководство пользователя

Страница: 55 / 330

Holden Acadia Owner Manual (Holden-Localizing-Holden-12561773) - 2019 -
crc - 8/28/18
Seats and Restraints 53
If too much time passes
between releasing SET and
pressing 1 or 2, the memory
position will not be saved and
the two beeps will not sound.
Repeat Steps 3 and 4.
1 or 2 corresponds to the driver
number. See
“ Identifying Driver
Number ” previously in this
section.
5. Repeat Steps 1 – 4 for the
second driver using 1 or 2 and
the other RKE transmitter.
To save positions for
B
seat exit
memory, repeat Steps 1 – 4 using
B
, this time though, adjust the seat
to a desirable position for getting out
of the vehicle. Also See
“ Seat Exit
Memory ” further in the Section.
Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.
Manually Recalling Memory
Positions
Press and hold button 1, 2, or
B
to
recall the desired previously saved
memory positions.
To stop manual recall movement,
release 1, 2, or
B
. Recall can also
be stopped by pressing a power
seat control or SET.
Seat Entry Memory
If the RKE transmitter is 1 or 2, and
Seat Entry Memory is enabled in
vehicle personalisation, the
positions saved to the
corresponding memory button 1 or 2
are automatically recalled when the
ignition is turned on, or turned from
off to Accessory mode. Seat entry
memory recalls can only be saved
to two RKE transmitters.
If required, to enable seat entry
memory, see
Vehicle
Personalisation 0 110 .
The transmission must be in
P (Park) to initiate a seat entry
memory recall. The seat entry
memory operation will complete if
the vehicle is shifted out of P (Park)
prior to reaching the saved position.
To stop the movement, turn the
ignition off or press any of the
following controls:
.
Power seat
.
Memory SET, 1, 2, or
B
.
Power mirror, with the driver or
passenger side selected
If the saved memory seat position
does not automatically recall,
or recalls to the wrong positions, the
driver's RKE transmitter number (1
or 2) may not match the memory
button number that positions were
saved to. Try saving the position to
the other memory button or try the
other RKE transmitter.
Seat Exit Memory
Seat exit memory is not linked to an
RKE transmitter. The position saved
to
B
is used for all drivers. To
enable Seat Exit Memory, see
Vehicle Personalisation 0 110 .