Hioki 3522-50, Инструкция по эксплуатации

Страница: 180 / 204

166
────────────────────────────────────────────────────
7.1 General Specification
────────────────────────────────────────────────────
4. Test signal levels
Open circuit voltage (V)
mode and
Constant voltage (CV)
mode Range 0.010 to 5.000 V, 100 mA max.
Resolution 0.001 V steps
Accuracy
10% 10 mV
Constant current (CC)
mode
Range 0.01 to 99.99 mA, 5 V max.
Resolution 0.01 mA steps
Accuracy
10% 10
μ
A
Monitor function
Voltage monitor (Vmoni)
Range 0.000 V to 5.000 V
Accuracy
10% 10 mV
Current monitor (Imoni)
Range 0.000 mA to 100.0 mA
Accuracy
10% 10
μ
A
Limit function
Current limit (I-LIM)
(V, CV mode)
Range 0.01 mA to 99.99 mA
Accuracy
10% 10
μ
A
Voltage limit (V-LIM)
(CC mode)
Range 0.010 V to 5.000 V
Accuracy
10% 10 mV
5. Residual charge
protection
400 V max (for reference only)
Where:
{C: capacitance of the sample under test in farads}
6. Test ranges (RANGE)
The test range is determined according to impedance and phase
angle. The values of the other test parameters are calculated from
|
Z |.
Ranges
100 m
Ω
, 1
Ω
, 10
Ω
, 100
Ω
, 1 k
Ω
, 10 k
Ω
, 100 k
Ω
,
1 M
Ω
, 10 M
Ω
, and 100 M
Ω
(10 ranges, can be set either
automatically or manually)
|
Z
| display range
10.00 m
Ω
to 200.00 M
Ω
(5 digits)
θ
display range
+180.00 to -180.00 (5 digits)
7. Display ranges
The measurement range varies according to the test frequency.
( ): impedance
Y, G , B
5.0000 nS to 99.999 S 5 digits
R , X
10.00 m
Ω
to 200.00 M
Ω
5 digits
L 16.000 nH to 750.00 kH 5 digits
C 0.3200 pF to 1.0000 F 5 digits
D 0.00001 to 9.99999 6 digits
Q 0.01 to 999.99 Resolution:0.01
NOTE: The test range of L and C varies depending on the test
frequency and value of
θ
.
When the test speed is FAST, the parameters excluding D,
Q, and
θ
are displayed up to 4 digits.