Hioki 3522-50, Инструкция по эксплуатации

Страница: 163 / 204

149
────────────────────────────────────────────────────
5.9 9442 PRINTER (option)
────────────────────────────────────────────────────
5.9.1 Preparation
CAUTION
The 9442 is shipped with the function settings for use with the HIOKI 3166
CLAMP ON POWER HiTESTER. Before using, always change the settings of
the DIP switches.
For details on the operations and handling of the printer, refer to the
operation manual supplied to the printer.
For the printer, use the 1196 RECORDING PAPER (thermal paper, 10 rolls)
or an equivalent.
5.9 9442 PRINTER (option)
Using with the optional 9593-01 RS-232C INTERFACE, 9442 PRINTER,
and 9446 CONNECTION CABLE, the test values and screen display copy
can be printed out.
(1) Using of the printer
Use the 9442 PRINTER, the 9443-01 AC ADAPTER, and the 1196
RECORDING PAPER.
To connect the main unit and printer, use the 9593-01 RS-232C
INTERFACE and the 9446 CONNECTION CABLE. (All are options)
9442
9443-01 (for Japan)
9443-02 (for EU)
(2) Setting of the 9442 PRINTER communication condition
Change the settings of the software dip switches (DIP SW) to use the 9442
for the 3522-50.
1. Turn off the power.
2. Turn on the power while pressing the ON LINE button. Release the button
after a list of the current settings starts printing out.
3. The print out of the current settings is followed by the prompt:
"Continue? :Push 'On-line SW'", "Write?:Push 'Paper feed SW'".
Press the ON LINE button to change the settings.