Frequently Asked Questions (
Frequently Asked Questions (FAQ
FAQs)
s)
Click on a toggle below to find out the answer to the FAQ:
Q:
Q: Can an A
Can an AT
Tevo running fir
evo running firmwar
mware prior to v2.7.0 use the new file for
e prior to v2.7.0 use the new file format?
mat?
A
A:: No. If your ATevo runs firmware prior to v2.7.0, the manufacturer must supply you with the
two old-format firmware upgrade files. You can reference
for more
information.
Q:
Q: Does A
Does AT
Tevo fir
evo firmwar
mware v2.7.0 r
e v2.7.0 recognize the older file for
ecognize the older file format? Is it possible to upgrade the
mat? Is it possible to upgrade the
fir
firmwar
mware using the two old-for
e using the two old-format upgrade files?
mat upgrade files?
A
A:: Yes and yes. ATevo firmware v2.7.0 can be updated using the older, separate files. Support
for the older file format will eventually be removed. At that time, the single file using the new
format must be used.
Q:
Q: What if new and old for
What if new and old format fir
mat firmwar
mware files ar
e files are on a memory car
e on a memory card used to update an A
d used to update an AT
Tevo?
evo?
A
A:: If the card is in an ATevo running v2.6.6 and prior, it will only recognize the older file types.
An ATevo running 2.7.0 and later will first look for the newer file types (.HPB extension) and
display a list to choose from. The update will be performed using one of those files If the user
selects one. The older files will be ignored in this case. If the user presses ESC rather than
choosing one of the new file types it will then check for the older file types. If they are found,
the UI will offer to update using them.
Last modified: 21 May 2021
HindlePower Inc
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Copyright HindlePower Inc. 2021
Page 94 of 171
