FFactory Default Alar
actory Default Alarm R
m Relay Configuration
elay Configuration
Unless otherwise specified, the ATevo Auxiliary I/O Board (A4) will ship from the factory
with the following Alarm Relay Configuration:
FFactory Default Alar
actory Default Alarm R
m Relay Configuration
elay Configuration
R
Relay
elay Name
Name
Latching
Latching Delay
Delay
. #1
High DC Voltade
disabled 30 seconds
. #2
Low DC Voltade
disabled 30 seconds
. #3
DC Output Failure
disabled 30 seconds
. #4
Low AC Supply
disabled 30 seconds
. #5
Positive Ground Fault
disabled 30 seconds
. #6
Negative Ground Fault disabled 30 seconds
Last modified: 18 July 2022
14.5.
14.5. Software Configuration for Binary
Software Configuration for Binary
Inputs
Inputs
The Auxiliary I/O Board (A4) binary inputs are used to monitor, alarm, and/or report on the
status of any external switch or contact. Each input can be independently configured to be
active high or low, activate an alarm, and/or activate a control. ATevo assigns each input a
unique generic name that may be replaced by the user.
Unless otherwise specified, the ATevo Auxiliary I/O Board (A4) will ship from the factory with the
following binary input configuration:
FFactory Default Binary Input Configuration
actory Default Binary Input Configuration
Binary Input
Binary Input Name
Name Alar
Alarm State
m State A
Action
ction A
Active State
ctive State
1.
BI1-1 disabled
none
high
2.
BI1-2 disabled
none
high
Software Configuration Naming: In the following subsections, Auxiliary I/O Board
binary inputs default names are specified by board number (see Section 13.3),
and binary input number on the associated board. For example: ‘Aux 1 input B2’
specifies binary input #2 on Auxiliary I/O Board #1.
*
HindlePower Inc
ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en
Copyright HindlePower Inc. 2021
Page 136 of 171
