manualshive.com logo in svg

HIMA HIMatrix F60, Руководство пользователя

Поделиться
Скачать
HIMA HIMatrix F60 Скачать руководство пользователя страница 71

System Manual Modular Systems 

7 Start-Up 

HI 800 191 E Rev. 2.02 

Page 71 of 114 

-

 

Use the PADT date and time 

- to transfer the time and date displayed for the PADT into 

the controller. 

-

 

User-defined

 - to transfer the date and time from the two input boxes into the controller. 

Make sure that the format used for date and time is correct! 

6.  Click 

OK 

to confirm the action. 

The time and the date are set for the controller. 

7.4 

User Management in SILworX - CPU OS V7 and Higher 

SILworX can set up and maintain an own user management scheme for each project and 
controller. 

7.4.1 

User Management for SILworX Projects 

A PADT user management  scheme for administering the access to the project can be added to 
every SILworX project. 

If no PADT user management scheme exists, any user can open and modify the project. If a 
user management scheme has been defined for a project, only authorized users can open the 
project. Only users with the corresponding rights can modify the projects. The following 
authorization types exist. 

Type 

Description 

Security Administrator 
(Sec Adm) 

Security administrators can modify the user management scheme: 
setting up, deleting, changing the PADT user management scheme, 
and the user accounts and user groups, setting up the default user 
account. 
Furthermore, they can perform all SILworX functions. 

Read and Write (R/W) 

All SILworX functions, except for the user management 

Read only (RO) 

Read-only access, i.e., the users may not change or archive the 
projects. 

Table 39:  Authorization Types for the PADT User Management Scheme 

The user management scheme allocates the rights to the user groups. The user groups allocate 
the rights to the user accounts assigned to them. 

Characteristics of user groups: 

  The name must be unique within the project and must contain 1...31 characters. 

  A user group is assigned an authorization type. 

  A user group may be assigned an arbitrary number of user accounts. 

  A project may contain up to 100 user groups. 

User account properties 

  The name must be unique within the project and must contain 1...31 characters. 

  A user account is assigned a user group. 

  A project may contain up to 1000 user accounts. 

  A user account can be the project default user 

7.4.2 

User Management for the Controller 

The user management for a controller (PES user management) is used to protect the HIMatrix 
controller against unauthorized access and actions. The user and its access rights are part of 
the project; they are defined with SILworX and loaded into the processor module. 

The user management can be used to set and manage the access rights to a controller for up to 
ten users. The access rights are stored in the controller and remain valid after switching off the 
operating voltage. 

Содержание HIMatrix F60



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды