System Manual Modular Systems
1 Introduction
HI 800 191 E Rev. 2.02
Page 11 of 114
In addition to the Table 2 documents, the manuals specific to the F60 modules in use must be
taken into account.
1.2
Target Audience
This document addresses system planners, configuration engineers, programmers of
automation devices and personnel authorized to implement, operate and maintain the modules
and systems. Specialized knowledge of safety-related automation systems is required.
1.3
Formatting Conventions
To ensure improved readability and comprehensibility, the following fonts are used in this
document:
Bold
To highlight important parts.
Names of buttons, menu functions and tabs that can be clicked and used
in the programming tool.
Italics
For parameters and system variables
Courier
Literal user inputs
RUN
Operating state are designated by capitals
Chapter 1.2.3
Cross-references are hyperlinks even if they are not particularly marked.
When the cursor hovers over a hyperlink, it changes its shape. Click the
hyperlink to jump to the corresponding position.
Safety notes and operating tips are particularly marked.
1.3.1
Safety Notes
The safety notes are represented as described below.
These notes must absolutely be observed to reduce the risk to a minimum. The content is
structured as follows:
Signal word: warning, caution, notice
Type and source of risk
Consequences arising from non-observance
Risk prevention
The signal words have the following meanings:
Warning indicates hazardous situation which, if not avoided, could result in death or serious
injury.
Caution indicates hazardous situation which, if not avoided, could result in minor or modest
injury.
Notice indicates a hazardous situation which, if not avoided, could result in property damage.
SIGNAL WORD
Type and source of risk!
Consequences arising from non-observance
Risk prevention
