System Manual Modular Systems
3 Product Description
HI 800 191 E Rev. 2.02
Page 23 of 114
Overflow: Some events were not stored due to buffer overflow. The timestamp of the
overflow event corresponds to that of the event causing the overflow.
Init: The event buffer was initialized.
System events contain the SRS identifier of the device causing the events.
Status Variables
Status variables provide the user program with the state of scalar events. Each of the following
states is connected to a status variable and can be assigned a global variable of type BOOL:
Normal.
Low limit (L) exceeded.
Lowest limit (LL) exceeded.
High limit (H) exceeded.
Highest limit (HH) exceeded.
The assigned status variable becomes TRUE when the corresponding state is achieved.
3.5.3
Recording Events
The processor system records the events:
The processor system stores all the events in its buffer. The buffer is part of the non-volatile
memory and has a capacity of 1 000 events.
If the event buffer is full, no new events can be stored as long as no further events are read and
thus marked as to be overwritten.
3.5.4
Transfer of Events
The X-OPC server readout events from buffer and transfers this to a third-party system for
evaluation and representation. Four X-OPC servers can simultaneously read events out of a
processor module.
3.6
Product Data
Designation
Value, range of values
Power supply
Power supply module
24 VDC, -15 %...+20 %, r
PP
15 %,
externally fused with 32 A
Goldcap in the processor module
(for buffering date/time)
Operating temperature
0...+60 °C
Storage temperature
-40...+85 °C
Type of protection
IP20 (unused slots covered, cover part no.: 60.528 2106)
Dimensions
260 mm x 312 mm x 245 mm (W x H x D)
Weight
max. 10 kg (completely assembled)
Table 14: Specifications of F60
The specifications for the module are detailed in the corresponding manuals.
3.7
Licensing with CPU 03
The following features of the controllers must be activated using a common license:
Multitasking
Reload
Sequence of events recording
The software activation code can be generated on the HIMA website using the system ID of the
controller (value 1...65 535). To this end, the
SMR
license must be activated.
