10.
Thread the two cables provided in the kit together using the cable retention clip on either ends of the
cables. Ensure that the clip posts are pointing towards the cable ends.
CAUTION:
The white and black cables from the auxiliary card connect to the adapter board
ports labeled WHITE CABLE and BLACK CABLE, respectively. The cable latch door must be
open when connecting the cables. Close the cable latch door after connecting the cable.
11.
Install the cables on the adapter:
a.
Connect the cable.
b.
Close the cable latch door until it clicks into place.
IMPORTANT:
The connector is very delicate. To avoid the risk of breaking or bending the
connector, push in the connector very gently. Do not touch the connector to avoid oil and dirt
transfer to the connection area.
12.
Push the clip down and slide the cable retention clip on the adapter.
Hardware options installation
75
