Hewlett Packard Enterprise ProLiant XL190r Gen10, Руководство пользователя

Страница: 57 / 183

DIMM population information
For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard
Enterprise website (
http://www.hpe.com/docs/memory-population-rules ).
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server:
• First-generation Intel Xeon Scalable processors support DDR4-2666 DIMMs.
• Second-generation Intel Xeon Scalable processors support DDR4-2666 DIMMs or DDR4-2933
DIMMs.
Mixing DIMM types is not supported. Install either all DDR4-2666 DIMMs or all DDR4-2933 DIMMs in the
server.
HPE SmartMemory speed information
For more information about memory speed information, see the Hewlett Packard Enterprise website
(
https://www.hpe.com/docs/memory-speed-table ).
Installing a DIMM
The server supports up to 16 DIMMs.
Procedure
1. Power down the server on page 23.
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis on page 28.
4. Remove the bayonet board on page 30.
5. Remove the secondary riser cage on page 33.
6. Install the DIMM:
a. Open the DIMM slot latches.
b. Align the notch on the bottom edge of the DIMM with the keyed surface of the DIMM slot, and
then fully press the DIMM into the slot until the latches snap back into place.
Hardware options installation 57