4.
Proceed to
Preparing the server for operation
on page 105.
Preparing the server for operation
Procedure
1.
If an expansion board in the primary riser slot was removed,
2. Install the secondary riser cage
on page 34.
3.
Connect all peripheral cables to the server.
on page 23.
Enabling the Trusted Platform Module
When enabling the Trusted Platform module, observe the following guidelines:
• By default, the Trusted Platform Module is enabled as TPM 2.0 when the server is powered on after
installing it.
• In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 or TPM
1.2.
• In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2
and TPM 2.0, but only TPM 1.2 operation is supported.
Enabling the Trusted Platform Module as TPM 2.0
Procedure
1.
During the server startup sequence, press the
F9
key to access
System Utilities
.
2.
From the System Utilities screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Server Security
>
Trusted Platform Module options
.
3.
Verify the following:
Hardware options installation
105
