http://www.hpe.com/support/safety-compliance-enterpriseproducts
• Read the system operational requirements and the server warnings and cautions:
◦
on page 46
◦
on page 48
Procedure
1.
Unbox the server node and verify the contents:
• Server node
• Documentation
2.
(Optional) Install the server hardware options. For installation instructions, see
on page 52.
3.
Install the server into the chassis
on page 29.
4.
Connect all peripheral cables to the servers and chassis.
5.
Connect each power cord to the chassis.
6.
Connect each power cord to the power source.
7.
Decide how to manage the server:
• Locally: Use a KVM switch or a connect a keyboard, monitor, and mouse.
• Remotely: Connect to the iLO web interface and run a remote console:
a.
Verify the following:
◦ iLO is licensed to use the remote console feature.
If iLO is not licensed, visit the HPE website:
◦ The iLO Management Port is connected to a secure network.
b.
Using a browser, navigate to the iLO web interface, and then log in.
https://<iLO hostname or IP address>
Note the following:
◦ The iLO hostname is located on the serial number/iLO information pull tab.
◦ If a DHCP server assigns the IP address, the IP address appears on the boot screen.
◦ If a static IP address is assigned, use that IP address.
◦ The default login credentials are located on the serial number/iLO information pull tab.
c.
In the side navigation, click the
Remote Console & Media
link, and then launch a remote
console.
Power on the server
8.
Press the Power On/Standby button.
For remote management, use the iLO virtual power button.
44
Setup
