Processor cautions
CAUTION:
To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
CAUTION:
If installing a processor with a faster speed, update the system ROM before installing
the processor.
To download firmware and view installation instructions, see the
CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED.
To avoid damage to
the socket or processor, do not touch the contacts.
CAUTION:
To prevent mechanical damage or depositing oil on your hands or other contamination,
hold the heatsink only by the edge of its base plate. Do not touch the heatsink fins.
IMPORTANT:
Existing HPE ProLiant and HPE Synergy Gen10 server products containing first-
generation Intel Xeon Scalable processors may not be upgraded to second-generation Intel Xeon
Scalable processors at this time.
Install the processor heatsink assembly
CAUTION:
The maximum inlet ambient temperature for most components installed in the system is
35°C (95°F). Some components, however, are subject to thermal limitations depending on the
chassis model and the fan configuration. There are some hardware configurations where it is
necessary to limit the number of drives installed in the chassis. For more information, see
.
Prerequisites
Before installing this option, make sure that you have the following tools available:
• T-15 Torx screwdriver
• T-30 Torx screwdriver
Procedure
1.
2.
Disconnect all peripheral cables from the server.
3.
Remove the server from the chassis
on page 28.
4.
on page 30.
5.
Remove the secondary riser cage
on page 33.
6.
Processor heatsink assemblies for processor sockets 1 and 2 are not interchangeable. Note the
appropriate assembly orientation on the heatsink label.
7.
Remove the processor socket blank.
54
Hardware options installation
