Henny Penny PFE-591, Руководство оператора

Страница: 48 / 73

Model PFE- 591
3-15. PROGRAMMING Or, to use the cooking setpoint temperature as the load
(Continued) compensation reference point, press until “STEP-X”
and “TEMP” flashes in the display. Now for example,
if the cooking temperature is 350°, the timer speeds up
when the shortening temperature is above 350, and
slows down when the temperature is below 350.
14. Go to Idle after Done?
Press and release and “GO TO IDLE, AFTER
DONE” shows in the display, along with “YES” or
“NO”. Press
to toggle between YES and NO.
15. Filter Cycle Mode (Optional)
For “FILTER AFTER” to appear in the Product Program
Mode, the Filter Tracking must be enabled in the Special
Program Mode. You have the option to program
“mixed”
(each product has its own filter count) or “global” (all
products have the same count).
Press .
“2,Mixed”
a. “FILTER AFTER” shows in the display, along with
the preset number of Cook Cycles.
b. Press and release until the desired number of
Cook Cycles between filters shows in the display. For
example, if 4 is set for a product, each time that product
is selected, it counts 1/4, or 25%. Then each time a
product is cooked, the percentages add up until 100%,
or more is reached. Then display shows “FILTER
SUGGESTED”.
“3,GLOBAL”
a. “FILTER INCL” shows in the display, along with “NO”
or “YES”
b.Press and release to “YES” if that product is
to be included in the filter count, or “NO” if it is not.
3-32 403