Henny Penny PFE-591, Руководство оператора

Страница: 59 / 73

Model PFE- 591
3-17. DATA LOGGING, HEAT The Data Logging, Heat Control, Tech and Stat Modes are
CONTROL, TECH MODE, advanced diagnostic and program modes, mainly for Henny
AND STAT MODE Penny use only. For more information on these Modes, contact
the Service Department at 1-800-417- 8405, or
1-937-456-8405.
Press and hold at any time to exit Special Program
Mode.
3-16. SPECIAL PROGRAM Change Shortening Cook Cycles (SP-17)
MODE (Continued) This mode allows the operator to set the number of Cook Cycles
between shortening changes. When the set numbers of Cook
Cycles is reached, the control displays “CHANGE OIL”. This
mode is just a reminder and cooking can continue.
For this feature to operate, the operator must reset the
Review Usage data in the Information Mode. See Review
Usage step in Information Mode Section.
a. Follows steps 1 and 2 above.
b Press until “SP-17” and “CHANGE OIL A-COOK
CYCLES” shows in display, along with the number of
Cook Cycles or “OFF”.
c. Press to change the number of Cook Cycles
(“OFF” to 5000 cycles).
Change Shortening Cook Cycles (SP-18)
This mode allows the operator to set the number of power on
hours between shortening changes. These hours are not only
cooking time, but the total time the fryer is on. When the set
numbers of hours are reached, the control displays “CHANGE
OIL”. This mode is just a reminder and cooking can continue.
For this feature to operate, the operator must reset the
Review Usage data in the Information Mode. See Review
Usage step in Information Mode Section.
a. Follows steps 1 and 2 above.
b Press until “SP-18” and “CHANGE OIL B-HOURS
shows in display, along with the number of hours or “OFF”.
c. Press to change the number of hours.
(“OFF” to 999 hours).
403 3-43