Henny Penny PFE-591, Руководство оператора

Страница: 50 / 73

Model PFE- 591
3-15. PROGRAMMING
(Continued) Next, press product you want to copy to, for example, by
pressing . The controller responds with a
confirmation message:
“COPY 2 TO 0?”
“1=YES 2=NO”
Press (YES) and the controller copies product #2 to the
product #0 position (the #2 product is left intact) and the display
shows “* COPIED *”, then returns to the “Select Prog Product”
step with the #0 product already selected.
Press (NO), or don’t press any button for 20 seconds,
the controller displays “X CANCELED X” and exits the
copy process. In this case no changes are made.
Erasing
On the “Select Prog Product” step, press .
“** OPTIONS **” followed by “*1. COPY A PROD” shows
in display.
Press three more times to reach the “Erase All” option:
“*2. ERASE A PROD” (erases a single product)
“*3. PRESET A PROD” (sets factory settings)
“*4. ERASE ALL”
Press to select the presently displayed “Erase All” option.
The controller responds with a confirmation message:
“ERASE ALL PROD ?”
“1=YES 2=NO”
Press (YES) to confirm that you want to erase all products
back to “empty” values. The controller responds by erasing each
product individually...
“ERASING 1”
“ERASING 2”
“ERASING 3”
“ERASING 4”
“ERASING 5”
Then briefly displays “* ALL ERASED *” and finally,
returns to the “Select Prog Product” display.
“ERASING 6”
“ERASING 7”
“ERASING 8”
“ERASING 9”
“ERASING 0”
3-34 403