Henny Penny PFE-591, Руководство оператора

Страница: 49 / 73

Model PFE- 591
3-15. PROGRAMMING Copy/Erase Pre-set Products
(Continued) Products and their setpoints can be copied from one menu
location on the controller to another location, preset the controls
to factory settings, or erase products and all their values.
1. Press and hold for one second until “PROG” shows
in the display, followed by “ENTER CODE”.
2. Enter code 1, 2, 3. “SELECT PRODUCT…PRESS
PROG” scrolls across the display, followed by
“DOWN” FOR OPTIONS”
3. Press and “**OPTION**”, followed by
“*1. COPY A PROD” shows in display. Press
again, each time, to view the following options:
*1. COPY A PROD
*2. ERASE A PROD
*3. PRESET A PROD
*4. ERASE ALL
*5. PRESET ALL
4. To select one of the above options, press while the
desired option shows in display.
Selecting PRESET A PROD, or PRESET ALL PROD
sets factory setpoints in those menu items.
Press at any time to exit the Options menu, or
wait 30 seconds and controller automatically exits.
The following are examples of copying and erasing products:
Copying
Press to select the presently displayed “COPY A
PROD” option. “COPY __ TO __” shows in display.
The first set of “_” is blinking. Select the product you wish to
copy
from. For example, by pressing the button:
“COPY 2 TO __” shows in display.
403 3-33