DRSR483GDCC/WW – GE
®
Super 7.0 Cu. Ft. Capacity Gas Dryer with Stainless Steel Drum
Specification Created 6/03
GE Appliances
Dryer Dimensions (in inches)
Exhaust Options:
When viewed from the front of the unit, exhaust 3-way via rear, left and
bottom. Dryer is shipped exhausted to the rear. Alternate exhausting
knockouts are supplied.
Gas:
An individual properly-grounded branch circuit, with a three-prong
grounding-type receptacle, protected by a 15 or 20 amp circuit breaker or
a time-delay fuse is required.
Gas Dryer Electric Rating:
120V, 60Hz, 6A
Gas (BTU/HR):
22,000. Factory-equipped for natural gas. Tested for LP
gas. LP gas supply requires a conversion kit. Check installation instructions
for correct kit and have a qualified gas technician install a conversion kit.
See dryer ducting information for proper installation.
Note:
Dryer wall outlet must be located within 36" of service cord entry
and accessible when dryer is mounted in position.
Installation Information:
For complete information, see installation
instructions packed with your dryer.
36
42
27
2
3-1/2
2-1/2
25-1/2*
Side View
Rear View
8-1/2
28-1/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
5''
Back View
Power
Cord Hole
4-1/2''
Power Cord Locations
