HEIDENHAIN 548431-05, Руководство пользователя, Страница: 578 / 722

Tool and technology database | Tool data
8
578
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
Direction of rotation ( MD ): If you define a direction of rotation,
in the cycles using this tool a switching command ( M3 or M4 )
is automatically generated either for the spindle or, with driven
tools, for the auxiliary spindle
It depends on the PLC software of your machine
whether the generated switching commands are
evaluated. If the PLC does not execute the switching
commands, this parameter should not be entered.
Refer to your machine manual.
Tool text ( QT ): You can assign a tool text to each tool. The text
is shown in the tool lists. Because the tool texts are managed in
a separate list, the reference to the text is entered in
QT
Further information: "Tool texts", Page 565
Cutting material ( SS ): This parameter is required if you want to
use the cutting data from the technology database
Further information:
"Technology database", Page 597
Compensation factors ( CK , FK , DK ): These parameters serve
for the tool-specific adjustment of the cutting values. The
cutting data from the technology database are multiplied by the
compensation factors before they are entered as default values
Additional information ( PLC ): You can find information on this
parameter in the machine manual. This date can be used for
machine-specific settings.
Idle time ( MT , RT ): If you use the tool life management, specify
the tool life of the cutting edge in
MT
. In
RT
, the control shows
the tool life already passed .
No.pieces ( MZ , RZ ): If you use the tool life management, use
MZ
to specify the number of workpieces that can be machined
with one cutting edge. In RZ the control shows the number of
workpieces that have already been machined with this cutting
edge.
The tool life monitoring and the quantity count are
used alternatively.
Manual change system
(
MTS
): Define the tool holder