HEIDENHAIN 548431-05, Руководство пользователя, Страница: 483 / 722

ICP programming | Front face contours in
smart.Turn
mode of operation
6
HEIDENHAIN | MANUALplus 620 | User's Manual | 12/2017
483
Linear pattern on front face
Reference data of face:
ID
:
Contour
PT : Milling depth
ZR : Reference dimension
Parameters of figure:
XK
,
YK
:
1st pattern point
(in Cartesian coordinates)
QP : Quantity of points in pattern
IP , JP : Final point of pattern (in Cartesian coordinates)
IPi
,
JPi
:
Final point
– Distance between two pattern points (in
XK and YK )
AP
:
Position angle
RP : Length – Total length of pattern
RPi : Length – Distance between two pattern points
Parameters of selected figure or hole
You can use the
Select reference plane
function to determine the
Reference dimension ZR .
Further information: "Reference data and nested contours",
Page 472
ICP generates the following:
The
FRONT
section code with the
Reference dimension
parameter. In nested contours, ICP generates only one section
code
a
G308
with the
Contour name
and
Milling depth
or
Boring
depth (–1* BT ) parameters
A
G401
with the parameters of the pattern
The G code and the parameters of the figure or hole
A
G309